| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 650 x 450 mm | |
|---|---|---|
| Tabletop thickness | 45 mm | |
| Plinth base height | 60 mm | |
| Front drawer internal dimensions | 530 x 375 x 120 mm | |
| Rear drawer internal dimensions | 530 x 375 x 120 mm | |
| Drawer front panel thickness | 20 mm | |
| Tabletop corner bevel radius | 10 mm | |
| Recessed handle groove length | 480 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed tabletop static load capacity | 136 kg | |
|---|---|---|
| Net product weight | 50 kg | |
| Drawer slide cycle rating | 50000 open/close cycles | |
| Surface scratch resistance rating | Class 2 | |
| Wood moisture content at delivery | 12% | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop construction | FAS-grade solid white oak with clear matte UV-cured finish | |
|---|---|---|
| Drawer box construction | Solid kiln-dried pine wood with sanded interior finish | |
| Drawer slide hardware | Cold-rolled steel soft-close full-extension glides with zinc plating | |
| Plinth frame construction | Solid oak frame with mortise-and-tenon joinery for structural rigidity | |
| Recessed handle detail | Integrated routed solid oak groove, no additional metal or plastic hardware | |
| Edge finishing | Sanded and beveled solid oak edges with rounded 1mm corner radius to prevent impact injury | |
| Finish coating | Low-VOC clear matte wood sealant, 0.05mm dry film thickness | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Dual-sided drawer access | 2 drawers accessible from front seating side, 2 matching drawers accessible from rear side, total 4 storage compartments | |
|---|---|---|
| Soft-close drawer mechanism | Drawers self-latch during final 50mm of travel, preventing slamming and reducing operation noise | |
| Full-extension drawer travel | Drawers extend 375mm outward to provide full access to internal storage space without reaching over the table | |
| Leveling base adjustment | Concealed adjustable foot glides at plinth base corners allow 10mm height adjustment to compensate for uneven floors | |
| Surface utility design | Flat even tabletop with 45mm thick solid surface supports placement of beverages, books, and decorative items for living room lounge use | |
| Integrated handle operation | Recessed linear routed handles allow drawer opening with 20mm finger clearance, no protruding hardware for a seamless minimalist appearance | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room application | Positioned in front of sofas or sectionals as a central surface for drinks, reading materials, and decorative display, matched with complementary TV console and side cabinets | |
|---|---|---|
| Small to medium living space fit | Suitable for 2.5m to 3.5m wide seating areas, providing proportional low-profile scale without overwhelming open floor plans | |
| Minimalist and natural interior schemes | Compatible with Japanese-inspired, Scandinavian, and modern natural wood design palettes, with light oak finish and handleless form that reduces visual clutter | |
| Dual-access layout suitability | Ideal for open-concept living rooms where seating is positioned on both sides of the table, allowing storage access from multiple directions | |
| Low-maintenance household use | Matte sealed solid wood surface resists common household spills and requires only periodic dry wiping for regular upkeep | |
| Coordinated furniture set pairing | Designed to match companion low-profile TV console, 2-drawer side chest, and glass-door display cabinet as shown in the product scene |
EU Market Access Requirements* EN Standards
| EN 312:2010 | Particleboard performance requirements, applicable if any engineered wood components are used in construction | |
|---|---|---|
| EN 12521:2015 | Furniture for domestic use, strength, durability and safety requirements for tables | |
| EN 71-3:2019 | Safety of toys - Migration of certain elements, applicable for child-safe household furniture edge and finish requirements |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural quality acceptance | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for formaldehyde and heavy metal emission verification | |
| GB/T 4893.4-2013 | Surface wear resistance test method for furniture finishes, applicable for surface durability verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural quality acceptance; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for formaldehyde and heavy metal emission verification; 3. GB/T 4893.4-2013: Surface wear resistance test method for furniture finishes, applicable for surface durability verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
