| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 45 mm | |
| Square leg cross-section | 80 x 80 mm | |
| Floor-to-apron knee clearance | 670 mm | |
| Apron height | 80 mm | |
| Edge profile thickness | 45 mm | |
| Leg corner offset from table edge | 20 mm | |
| Perimeter seating clearance | 300 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed tabletop static load | 180 kg | |
|---|---|---|
| Concentrated edge static load | 50 kg | |
| Seating capacity | 6 people | |
| Product net weight | 70 kg | |
| Structural joint load cycle rating | 10000 cycles | |
| Finish pencil hardness | 3H | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop material | Solid natural hardwood, edge-glued construction | |
|---|---|---|
| Tabletop finish | Matte water-based clear lacquer, 0.15mm dry film thickness | |
| Leg material | Solid square hardwood, one-piece construction | |
| Apron frame material | Solid hardwood, connected to legs with mortise-and-tenon joints | |
| Connection hardware | Zinc-plated steel knock-down bolts, 8mm diameter | |
| Foot pads | Non-slip PE plastic leveling pads, 5mm thickness | |
| Wood moisture content | 11% | |
| Surface abrasion resistance | 2000 cycles | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Height adjustment | Fixed 750mm dining height, no lift or extension mechanism | |
|---|---|---|
| Assembly requirement | Knock-down assembly required, hardware and instructions included | |
| Leveling adjustment | Screw-adjustable foot pads at each leg base, 10mm adjustment travel | |
| Surface use | Heat-resistant up to 180°C for 2 hours, suitable for hot dish placement | |
| Seating access | Unobstructed perimeter access, supports chairs on all four sides | |
| Surface maintenance | Wipe clean with soft damp cloth, no harsh solvent cleaners required | |
| Modular compatibility | Fixed non-extendable top, no leaf insertion or expansion capability | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Suitable for 6-person family daily meals and casual gatherings, standard dining height | |
|---|---|---|
| Open-plan kitchen dining area | Light natural wood finish complements Scandinavian and Japanese minimalist interiors | |
| Small apartment dining nook | 1800x900mm footprint fits compact open living spaces without blocking circulation | |
| Cafe casual seating area | Durable solid wood construction supports high-frequency commercial light-use settings | |
| Matching furniture set | Pairs with light wood frame dining chairs with dark upholstered seats for coordinated styling |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables, applicable for performance verification | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for stability of tables, applicable for tipping resistance checks |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety and dimension checks | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials – limit of harmful substances for wood furniture | |
| GB/T 4893.4-2013 | Surface abrasion resistance test for furniture coatings, applicable for finish durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety and dimension checks; 2. GB 18584-2001: Indoor decorating and refurbishing materials – limit of harmful substances for wood furniture; 3. GB/T 4893.4-2013: Surface abrasion resistance test for furniture coatings, applicable for finish durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
