| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 610 x 500 mm | |
|---|---|---|
| Leg height | 230 mm | |
| Tabletop thickness | 18 mm | |
| Single drawer internal dimensions | 580 x 520 x 95 mm | |
| Drawer front panel thickness | 15 mm | |
| Leg diameter at floor contact point | 35 mm | |
| Integrated handle length | 120 mm | |
| Tabletop edge radius | 30 mm | |
| Floor clearance under drawer base | 180 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop static distributed load capacity | 75 kg | |
|---|---|---|
| Net product weight | 28 kg | |
| Recommended maximum placemat/object footprint | 1200 x 550 mm | |
| Surface wear resistance rating | 2000 abrasion cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | E1-grade engineered wood with natural oak veneer | |
|---|---|---|
| Table frame and edge trim | Solid rubberwood with clear matte lacquer | |
| Drawer fronts | E1-grade MDF with matte white lacquer finish | |
| Legs | Solid rubberwood, tapered cylindrical, outward angled | |
| Drawer handles | Solid wood, integrated horizontal pull design | |
| Drawer slides | Cold-rolled steel side-mounted 3/4 extension slides | |
| Leg floor pads | Felt anti-scratch pads | |
| Finish coating | Water-based matte lacquer, formaldehyde emission ≤0.124mg/m3 | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | Two front-facing pull-out drawers for concealed small-item storage | |
|---|---|---|
| Surface use | Flat stable top supports drinks, decor, books and serving trays | |
| Leg stability | Four outward-angled legs distribute load evenly to prevent tipping | |
| Edge safety | Rounded bullnose edges reduce impact injury risk | |
| Floor protection | Felt leg pads prevent scratches on hard flooring surfaces | |
| Assembly requirement | Knock-down assembly with included hardware and instructions | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room placement | Positioned directly in front of 3seater sofas for beverage and decor placement | |
|---|---|---|
| Small apartment use | Compact 1.3m width fits small to medium residential living spaces | |
| Storage organization | Concealed drawers store remote controls, coasters and reading materials | |
| Nordic/modern minimalist interiors | Two-tone light wood and white finish matches Scandinavian decor schemes | |
| Hard flooring compatibility | Felt leg pads suit wood, tile and laminate flooring without surface damage |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety requirements for domestic tables |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural verification | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials – limit of harmful substances for wooden furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural verification; 2. GB 18584-2001: Indoor decorating and refurbishing materials – limit of harmful substances for wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
