| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 1800 x 950 x 760 mm | |
|---|---|---|
| Tabletop thickness | 50 mm | |
| Leg section dimension | 60 x 40 mm | |
| Under-table knee clearance height | 690 mm | |
| Leg setback from table corner | 80 mm | |
| Corner edge radius | 15 mm | |
| Leg splay angle from vertical | 8 degrees | |
| Long-side leg spacing | 1500 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed tabletop static load capacity | 150 kg | |
|---|---|---|
| Seating capacity | 6 people | |
| Product net weight | 82 kg | |
| Leg vertical static load per leg | 40 kg | |
| Finish abrasion resistance | Grade 2, 4000 cycles | |
| Wood moisture content | 10% | |
| Adjustable foot adjustment range | 10 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop core | Grade A solid light oak, edge-glued construction | |
|---|---|---|
| Tabletop finish | Matte clear lacquer, 0.15mm dry film thickness | |
| Leg construction | Solid light oak tapered splayed legs, paired sets at each corner | |
| Connector hardware | Zinc-plated steel M8 bolt assemblies, 60mm length | |
| Foot pads | Non-marking TPE adjustable glides at each leg base | |
| Edge treatment | Hand-sanded eased edges, 120-grit final sanding | |
| Wood joint construction | Mortise and tenon leg-to-apron joints, glued and bolted | |
| Apron frame | Solid oak 80mm wide supporting apron under tabletop | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Leveling adjustment | Individual TPE glides rotate to adjust for uneven floor surfaces up to 10mm | |
|---|---|---|
| Tabletop configuration | Fixed non-extendable solid wood top, no leaf storage mechanism | |
| Surface use | Smooth sealed surface supports dining, laptop use, and communal work activities | |
| Leg stability | Splayed paired leg geometry increases lateral stability for daily use | |
| Floor protection | Non-marking glides prevent scuffing on hard polished floor surfaces | |
| Assembly requirement | Legs attach to pre-installed apron inserts with included hex key tool | |
| Under-table access | Open unobstructed underframe provides full leg clearance for all seating positions | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining space | Seats 6 people for family meals in open-plan kitchen dining areas | |
|---|---|---|
| Library reading area | Provides flat communal work surface adjacent to bookshelves for quiet study | |
| Cafe casual seating zone | Durable solid wood construction supports daily commercial foodservice use | |
| Office breakout space | Open underframe supports informal team meetings and refreshment breaks | |
| Co-working communal area | Scandinavian aesthetic matches light open workspace interior design schemes | |
| Education common room | Stable construction supports student group work and casual dining |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety requirements for domestic dining tables | |
|---|---|---|
| EN 15372:2016 | Furniture - Strength, durability and safety for non-domestic tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to indoor solid wood tables | |
|---|---|---|
| GB/T 4893.8-2013 | Surface abrasion resistance test method for furniture finishes |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to indoor solid wood tables; 2. GB/T 4893.8-2013: Surface abrasion resistance test method for furniture finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
