| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 660 x 457 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Leg diameter at floor contact | 35 mm | |
| Splayed leg outward angle | 12 degrees | |
| Under-table floor clearance | 427 mm | |
| Tabletop edge radius | 60 mm | |
| Leg spacing along long edge | 820 mm | |
| Leg spacing along short edge | 460 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop distributed static load | 23 kg | |
|---|---|---|
| Net product weight | 16 kg | |
| Leg joint vertical pull-out resistance | 50 kg | |
| Recommended maximum place setting count | 4 | |
| Surface impact resistance | 1.2 J | |
| Warranty period | 2 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 18mm thick E1 grade engineered wood particleboard | |
|---|---|---|
| Tabletop finish | Matte white UV-cured lacquer coating, 0.15mm dry film thickness | |
| Leg construction | Solid natural beech wood, clear matte natural finish | |
| Leg mounting hardware | Zinc-plated M8 hanger bolts with steel threaded inserts | |
| Underside support bracing | 20mm thick solid wood cross cleats at leg attachment points | |
| Edge treatment | Rounded profile matching tabletop material, fully lacquered to match surface | |
| Foot pads | 5mm thick non-slip PE floor protection pads at each leg base | |
| Moisture content of wood components | 10% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Structural configuration | Fixed non-folding, non-height-adjustable rigid frame | |
|---|---|---|
| Floor protection | PE foot pads prevent floor scratches and reduce sliding on hard surfaces | |
| Surface maintenance | Matte finish resists minor liquid stains and wipes clean with damp cloth | |
| Assembly method | Knock-down flat pack, legs attach to underside with included hex key | |
| Load distribution | Four splayed legs spread weight evenly for stable placement on low-pile rugs | |
| Edge safety | Rounded oval edges eliminate sharp corners for household use | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary placement | Central position in front of 3seater fabric or leather sofas in residential living rooms | |
|---|---|---|
| Secondary application | Small apartment lounge or studio open seating areas with low-profile seating | |
| Commercial application | Casual lounge areas in boutique offices, co-working spaces or cafe waiting zones | |
| Floor compatibility | Suitable for placement on low-pile rugs, hardwood, laminate and tile flooring | |
| Recommended complementary pieces | Fabric lounge sofas, light wood side tables, neutral toned area rugs |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture for domestic use, tables: safety, strength and durability requirements | |
|---|---|---|
| EN 13722:2004 | Furniture: assessment of surface resistance to cold liquids for coated furniture tops |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety and dimensional tolerance checks | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of formaldehyde emission for wooden furniture, required for E1 grade substrate verification | |
| GB/T 4893.4-2013 | Surface film adhesion test for furniture finishes, applicable for lacquer coating durability checks |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety and dimensional tolerance checks; 2. GB 18584-2001: Indoor decoration material limit of formaldehyde emission for wooden furniture, required for E1 grade substrate verification; 3. GB/T 4893.4-2013: Surface film adhesion test for furniture finishes, applicable for lacquer coating durability checks; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
