| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 2200 x 800 x 750 mm | |
|---|---|---|
| stone tabletop section width | 1300 mm | |
| solid black tabletop section width | 900 mm | |
| tabletop thickness | 80 mm | |
| left storage pedestal dimensions | 900 x 450 x 670 mm | |
| right frosted acrylic support dimensions | 350 x 450 x 670 mm | |
| seated knee clearance height under table | 650 mm | |
| seated knee clearance depth along front edge | 850 mm | |
| matching upholstered bench dimensions | 1800 x 380 x 450 mm | |
| bench seat cushion thickness | 80 mm | |
| bench support leg dimensions | 150 x 300 x 370 mm | |
| table overhang past acrylic support | 200 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| table top static load capacity | 260 kg | |
|---|---|---|
| table net weight | 180 kg | |
| recommended seated user capacity | 6 | |
| stone surface scratch resistance (reference) | 4 Mohs | |
| acrylic support impact resistance | 12 kg drop from 300mm | |
| warranty period | 3 years | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
| right tabletop section | Polished black-and-white veined natural marble/luxury stone, sealed stain-resistant finish | |
|---|---|---|
| left tabletop section | Matte black engineered stone/sintered stone, scratch-resistant surface | |
| left support pedestal | Black matte engineered wood with vertical slatted front panel, internal storage compartment | |
| right support panel | 50mm thick frosted semi-transparent acrylic, polished edge finish | |
| bench frame and legs | Black matte painted solid wood/engineered wood frame, block leg construction | |
| bench seat cushion | High-resilience polyurethane foam, 40kg/m³ density, 55% rebound rate | |
| bench upholstery fabric | 280g/m² woven polyester-linen blend, 30000 rub abrasion resistance | |
| floor contact pads | 8mm thick non-slip rubber pads under all support bases | |
| pedestal internal hardware | 18mm thick cabinet-grade particleboard core, 2mm black edge banding | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| left pedestal storage | Internal enclosed compartment behind vertical slatted front for tea accessory storage | |
|---|---|---|
| table surface configuration | Dual-material top with dedicated stone tea service zone on right for tea tray and teaware | |
| knee space design | Unobstructed open knee well between left cabinet and right acrylic support for seated users | |
| seating compatibility | Supports paired long bench, host chair, and additional guest chairs around perimeter | |
| surface maintenance | Polished stone surface enables quick wipe cleaning of tea spills and water marks | |
| structural stability | Wide dual-base design eliminates table wobble during tea preparation and serving | |
| installation requirement | Knockdown assembly for tabletop, pedestal, acrylic support and bench, hardware included | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| office reception meeting room | Serves as dedicated tea service station for clientReceptionand internal meetings, seating 6users | |
|---|---|---|
| private tea room | Suits dedicated home or club tea rooms for formal tea ceremony and casual gatherings | |
| open-plan executive lounge | Functions as a collaborative gathering table with integrated storage for tea supplies | |
| high-end residential dining/tea space | Works as dual-use casual dining and tea service table for open-plan living areas | |
| design studio display area | Serves as a statement feature table for showroom and designer space display | |
| corporate guest hospitality zone | Provides a professional tea reception point for visiting clients and partners |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic tables, applicable to structural performance | |
|---|---|---|
| EN 13722:2004 | Furniture upholstered seating strength and durability requirements, applicable to bench | |
| EN 1022:2018 | Domestic furniture seating stability test method, applicable to bench stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to cabinet and bench wood components | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wood furniture, applicable to board components | |
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable to engineered wood pedestal core material |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to cabinet and bench wood components; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wood furniture, applicable to board components; 3. GB/T 4897.3-2003: Particleboard for furniture use, applicable to engineered wood pedestal core material; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
