| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 900 x 750 mm | |
|---|---|---|
| Tabletop total thickness | 50 mm | |
| Sintered stone section thickness | 12 mm | |
| Metal frame leg panel dimensions | 400 x 600 x 700 mm | |
| Recessed tea tray dimensions | 1200 x 400 x 20 mm | |
| Under-table knee clearance height | 680 mm | |
| Table edge overhang | 50 mm | |
| Stone section tabletop depth | 500 mm | |
| Wood section tabletop depth | 400 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 300 kg | |
|---|---|---|
| Sintered stone surface heat resistance | 280 °C | |
| Sintered stone surface abrasion resistance | 6000 revolutions | |
| Seating capacity | 6 users | |
| Product net weight | 165 kg | |
| Solid wood moisture content | 10% | |
| Integrated tea tray drainage flow rate | 2 L/min | |
| Warranty period | 10 years | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Front tabletop section | 12mm white veined sintered stone | |
|---|---|---|
| Rear tabletop section | 50mm thick solid walnut wood | |
| Left support pedestal | Solid wood block with wood veneer exterior | |
| Right support frame | 2mm thick carbon steel frame with sintered stone inset panels | |
| Integrated tea tray | Black high-pressure phenolic laminate | |
| Table edge treatment | Hand-sanded rounded edge | |
| Wood surface finish | 5-coat UV-cured open-pore clear lacquer | |
| Frame anti-corrosion treatment | Electrophoretic anti-rust coating under powder coat | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Integrated draining tea tray | Recessed flush-mount design with hidden drain hose | |
|---|---|---|
| Split tabletop zoning | Dedicated stone service area and wood tea preparation area | |
| Cable management provision | Hidden 50mm diameter port in wood pedestal | |
| Asymmetrical base layout | Offset supports create unobstructed leg room on all sides | |
| Optional concealed compartment | Removable wood panel below tea tray | |
| Surface spill containment | 1mm raised lip around stone tabletop edge | |
| Leveling adjustment | 15mm adjustable glides on both base supports | |
| Modular accessory fit | Pre-drilled mounting points for optional induction tea boiler | |
| Solid wood block pedestal dimensions | 700 x 600 x 700 mm | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Office reception tea room | Formal tea service for 6 guests during business meetings | |
|---|---|---|
| Residential open-plan living room | Casual family tea service and small gatherings | |
| Dedicated home tea room | Daily tea brewing and hobby use for tea enthusiasts | |
| Private club lounge | Member entertainment and social tea events | |
| Hotel executive lounge | Premium guest amenity for VIP tea service | |
| Recommended seating configuration | 6 metal-frame chairs with linen seat cushions |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables | |
|---|---|---|
| EN 15372:2016 | Furniture – Strength, durability and safety for non-domestic tables | |
| EN 13722:2004 | Furniture – Test methods for surface resistance to abrasion |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wood furniture | |
| GB/T 4897.3-2003 | Particleboard for furniture use | |
| GB 6566-2010 | Limit of radionuclides in building materials |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture; 2. GB 18584-2001: Limit of harmful substances in wood furniture; 3. GB/T 4897.3-2003: Particleboard for furniture use; 4. GB 6566-2010: Limit of radionuclides in building materials; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
