| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (large variant) | 1400 x 700 x 750 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Table static load capacity | 150 kg | |
|---|---|---|
| Table net weight | 85 kg | |
| Full set total weight | 118 kg | |
| Recommended number of users | 3 | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles | |
| Gas-lift Cycling Reference | Acceptance target 100000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Primary table top surface | 18mm polished sintered stone with marble veining | |
|---|---|---|
| Rear table top section | Walnut-veneer wood composite panel | |
| Table support bases | Matte light grey MDF with walnut wood inlay strip | |
| Base edge trim | Bronze-tone metal decorative edging | |
| Built-in tea tray | Stainless steel recessed drain tray | |
| Seating upholstery | Faux leather over high-density foam | |
| Main chair frame | Black powder-coated steel tube frame | |
| Stool structural frame | Plywood inner frame with rounded edge trim | |
| Floor protection pads | Felt pads on base bottom | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Recessed tea tray system | Integrated flush-mounted drain tray to hold tea set and contain spills | |
|---|---|---|
| Dual-material table surface | Sintered stone front zone for serving, wood rear zone for equipment placement | |
| Fixed stable support | Dual wide panel bases eliminate wobble during tea preparation | |
| Coordinated seating set | 1 armed chair for host use, 2 armless stools for guest seating | |
| Scratch-resistant work surface | Sintered stone top resists hot teaware scratches and water damage | |
| Floor-safe design | Felt base pads prevent scuffing on carpet and hard flooring | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Home tea room use | Fits dedicated home tea spaces for casual tea service and hosting | |
|---|---|---|
| Office reception area use | Suitable for executive reception lounges to serve visiting guests | |
| Small open-plan living area use | 1400mm width fits compact apartment living spaces without crowding | |
| Commercial tea house booth use | Coordinated seating set works for individual customer booths | |
| Balcony leisure area use | 1200mm variant fits enclosed balconies for casual relaxation | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Furniture stability test | EN 1730:2012 | |
|---|---|---|
| Seating strength test | EN 12520:2015 |
Standards applicable to China-market projects
| Table mechanical safety | GB/T 3324 | |
|---|---|---|
| Chair mechanical safety | GB/T 3323 | |
| Upholstery formaldehyde limit | GB 18584 |
This product must meet the following technical requirements: 1. Table mechanical safety: GB/T 3324; 2. Chair mechanical safety: GB/T 3323; 3. Upholstery formaldehyde limit: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
