| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 2400 x 800 x 750 mm | |
|---|---|---|
| Tabletop thickness | 50 mm | |
| Central storage pedestal dimensions | 600 x 400 x 650 mm | |
| Metal support leg section | 50 x 50 mm square tubing | |
| Seating knee clearance height under table | 650 mm | |
| Embedded tea service zone length | 1200 mm | |
| Seating clearance between table edge and chair | 300 mm | |
| End support setback from table edge | 100 mm | |
| Paired lounge chair overall dimensions | 650 x 650 x 720 mm | |
| Seat height of paired chairs | 450 mm | |
| Table overhang on long sides | 50 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static uniform load capacity | 150 kg | |
|---|---|---|
| Whole set gross packaged weight | 75 kg | |
| Maximum seating capacity | 6 users | |
| Sintered stone surface Mohs hardness | 6 | |
| Hardware salt spray resistance duration | 48 hours | |
| Drawer slide cycle life (if fitted) | 80000 cycles | |
| Recommended structural warranty period | 5 years | |
| Sintered stone surface heat resistance | 1200 °C | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | 12mm sintered stone slab laminated on 38mm MDF substrate | |
|---|---|---|
| Support frame and legs | 1.5mm thick powder-coated carbon steel square tubing | |
| Central pedestal cabinet panels | 18mm thick particleboard with melamine finish, matte dark grey | |
| Paired chair frames | 1.2mm thick powder-coated carbon steel square tubing | |
| Chair seat and back upholstery | Breathable woven fabric over 40mm high-density foam padding | |
| Foot pads | Adjustable nylon leveling feet at all leg bases | |
| Tea service hardware | 304 stainless steel drain fitting and induction cooker cutout rim | |
| Connector hardware | Zinc alloy knockdown bolts and corner brackets for assembly | |
| Chair foot glides | Non-marking rubber floor protection glides | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Integrated tea service zone | Central tabletop cutout accommodates electric tea kettle and tea tray for direct brewing | |
|---|---|---|
| Built-in waste water drainage | Concealed drain connection under central pedestal routes water to removable waste bucket | |
| Central pedestal storage | Closed cabinet compartment under tea zone stores tea tools and waste bucket | |
| Knockdown assembly design | Frame, top, and pedestal ship flat for on-site assembly with included hardware | |
| Leveling adjustment | Adjustable feet compensate for uneven floor surfaces to keep tabletop stable | |
| Induction cooker compatibility | Central cutout supports standard 1200W embedded induction boiler for water heating | |
| Chair armrest support | Integrated metal armrests on all paired chairs provide stable arm support during tea service | |
| Cable management access | Rear cutout in central pedestal routes power cords for tea appliances without exposed wiring | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Office executive reception area | Provides formal tea service space for hosting visiting clients and business guests | |
|---|---|---|
| Tea house private lounge room | Serves dedicated group tea tasting sessions for 6 guests | |
| High-end residential open-plan living space | Functions as a multi-purpose gathering table for home tea entertainment | |
| Corporate showroom display | Demonstrates premium office furniture solutions for visiting procurement clients | |
| Executive lounge breakout space | Offers relaxed alternative meeting space for informal internal discussions | |
| Hotel executive club lounge | Supports premium guest beverage service in luxury hospitality environments |
EU Market Access Requirements* EN Standards
| Furniture safety for domestic tables | EN 12521:2015 | |
|---|---|---|
| Indoor furniture formaldehyde emission | EN 13986:2004+A1:2015 | |
| Surface resistance to cold liquids | EN 12720:2009+A1:2013 |
Standards applicable to China-market projects
| General wooden furniture technical requirement | GB/T 3324 | |
|---|---|---|
| Formaldehyde emission limit for wood-based panels | GB 18580 | |
| Metal furniture general technical condition | GB/T 3325 | |
| Furniture mechanical performance test for tables | GB/T 10357.1 |
This product must meet the following technical requirements: 1. General wooden furniture technical requirement: GB/T 3324; 2. Formaldehyde emission limit for wood-based panels: GB 18580; 3. Metal furniture general technical condition: GB/T 3325; 4. Furniture mechanical performance test for tables: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
