| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 800 x 560 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Frame metal tube wall thickness | 1.5 mm | |
| Lower storage shelf height from floor | 200 mm | |
| Lower water bucket compartment clearance | 400 x 400 x 400 mm | |
| Side vertical slat spacing | 30 mm | |
| Tea boiler recessed zone dimensions | 350 x 250 mm | |
| Floor clearance under bottom frame | 20 mm | |
| Middle storage shelf depth | 400 mm | |
| Frame leg section size | 40 x 40 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop distributed static load | 100 kg | |
|---|---|---|
| Integrated tea boiler heating power | 1500 W | |
| Recommended maximum user capacity | 4 people | |
| Unit net weight reference | 80 kg | |
| Metal frame static load capacity | 150 kg | |
| Boiler water boiling time per liter | 5 minutes | |
| Frame warranty period | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | White polished natural marble or sintered stone, heat-resistant surface | |
|---|---|---|
| Frame structure | Black powder-coated square steel tube, rust and scratch resistant finish | |
| Lower storage shelf | Black matte powder-coated steel sheet, welded to frame | |
| Side decorative panels | Vertical black powder-coated steel slats, open ventilated design | |
| Integrated tea boiler base | Black tempered glass heating panel, electric induction heating zone | |
| Included water pump | Food-grade silicone water supply tube, automatic water feed mechanism | |
| Frame weld joints | Full penetration welded joints, ground smooth before powder coating | |
| Surface finish coating thickness | 80 um | |
| Included tea kettle | Food-grade 304 stainless steel body, heat-resistant bakelite handle | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Automatic water feeding | Built-in electric pump draws water directly from 18.9L bottled water stored in lower compartment, one-button operation | |
|---|---|---|
| Integrated tea boiling | Recessed electric heating zone supports boiling water and tea sterilization, independent temperature control | |
| Drainage system | Hidden tabletop drain channel connects to removable waste water tray under tea zone | |
| Open lower storage | Left raised shelf holds books and tea accessories, right open compartment holds water bucket and small waste bin | |
| Scratch-resistant tabletop | Stone tabletop supports direct placement of hot teapots up to 180°C without damage | |
| Ventilated frame design | Vertical slat side panels allow air circulation to prevent moisture buildup around water bucket | |
| Floor protection | Bottom frame fitted with non-slip rubber feet to prevent floor scratching | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room center placement | Suitable for placement in front of sofas in home living rooms for daily tea serving and guest reception | |
|---|---|---|
| Office reception area use | Suitable for executive office reception areas to serve tea to visiting clients | |
| Hotel lounge placement | Suitable for hotel suite lounges and public tea areas for guest use | |
| Tea room application | Suitable for dedicated home or small commercial tea rooms for kung fu tea brewing | |
| Recommended pairing | Pairs with 4 low backless tea stools for complete tea serving set for 4 users | |
| Surface care note | Stone tabletop requires daily cleaning with soft cloth, avoid abrasive cleaning tools to protect finish |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Domestic furniture strength and durability requirements for tables, applicable for load verification | |
|---|---|---|
| EN 60335-2-15:2019 | Safety requirements for electric heating appliances for liquids, applicable to tea boiler | |
| EN 13722:2004 | Furniture surface finish durability test standard, applicable for coating quality |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden and metal furniture, applicable for structural safety verification | |
|---|---|---|
| GB 4706.1-2005 | Safety requirements for household electrical appliances, applicable to integrated electric tea boiler | |
| GB/T 19001-2016 | Quality management system standard, applicable for production quality acceptance reference |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden and metal furniture, applicable for structural safety verification; 2. GB 4706.1-2005: Safety requirements for household electrical appliances, applicable to integrated electric tea boiler; 3. GB/T 19001-2016: Quality management system standard, applicable for production quality acceptance reference; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
