| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2800 x 1000 x 750 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Base enclosure height | 690 mm | |
| Per-person seating space | 600 mm | |
| Long-side overhang | 100 mm | |
| Short-side overhang | 100 mm | |
| Knee clearance under table | 660 mm | |
| Base wall thickness | 18 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Static distributed tabletop load | 300 kg | |
|---|---|---|
| Recommended user capacity | 8 persons | |
| Surface heat resistance | 120 °C | |
| Surface abrasion resistance | 4000 cycles | |
| Moisture content of wood base components | 12% | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | Polished natural white marble with grey veining, nano anti-stain coating | |
|---|---|---|
| Tabletop backing | 15mm high-density fiberboard reinforcing layer | |
| Primary pedestal structure | Dark charcoal lacquered engineered wood block frame | |
| Base decorative trim | Brushed gold-toned metal accent strips at base corners | |
| Internal connection hardware | 10mm steel corner brackets with M8 connecting bolts | |
| Bottom foot pads | 8mm thick non-slip rubber pads at each base corner | |
| Base surface finish | Matte PU lacquer with anti-scratch topcoat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Supports 8-person perimeter seating with equal access to all table edges | |
|---|---|---|
| Surface cleaning | Wipe-clean non-porous treated surface resists tea and beverage stains | |
| Structural design | Fully fixed rigid frame with no folding, extension or moving mechanisms | |
| Level adjustment | Adjustable rubber foot pads compensate for 10mm uneven floor height difference | |
| Tea service layout | Flat uninterrupted top supports full kung-fu tea set and casual dining place settings | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining space | Suitable for open-plan luxury dining rooms serving family meals and tea gatherings | |
|---|---|---|
| Commercial reception lounge | Applicable for high-end office reception or club lounge tea reception areas | |
| Villa open living area | Ideal for large villa multi-functional spaces combining dining and tea entertainment | |
| Recommended pairing | Pairs with light-upholstered metal-frame casual dining/tea chairs for coordinated style | |
| Floor requirement | Suitable for installation on level hard tile, stone or wood flooring with weight capacity ≥400kg/sqm |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Safety strength and durability requirements applicable to domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Surface performance requirements applicable to finished furniture worktops |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements applicable to wooden dining tables for indoor use | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limit E1 ≤ 0.124mg/m³ applicable to wood base components | |
| GB/T 19001-2016 | Quality management system reference for supplier production and delivery processes |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements applicable to wooden dining tables for indoor use; 2. GB 18580-2017: Formaldehyde emission limit E1 ≤ 0.124mg/m³ applicable to wood base components; 3. GB/T 19001-2016: Quality management system reference for supplier production and delivery processes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
