| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 650 x 600 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Frame tube section size | 40 x 40 mm | |
| Frame wall thickness | 1.5 mm | |
| Left closed cabinet dimensions | 450 x 600 x 600 mm | |
| Open cubby compartment size (each) | 300 x 280 x 280 mm | |
| Right slatted lower shelf clearance | 320 mm | |
| Slatted shelf bar spacing | 40 mm | |
| Recessed tea tray zone size | 600 x 300 mm | |
| Floor clearance under bottom frame | 20 mm | |
| Tea appliance placement zone clearance | 350 x 300 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop distributed static load | 100 kg | |
|---|---|---|
| Lower slatted shelf static load | 30 kg | |
| Closed cabinet shelf static load | 20 kg | |
| Product net weight | 45 kg | |
| Electric tea boiler boil time | 2 minutes | |
| Seating capacity for tea service | 4 users | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 12mm white marble-vein sintered stone, scratch-resistant polished surface | |
|---|---|---|
| Support frame | Matte black powder-coated carbon steel square tube, welded construction | |
| Left cabinet panel | Matte black melamine-faced engineered wood panel, sealed edge | |
| Lower slatted shelf | Black powder-coated carbon steel parallel bars, welded to frame | |
| Internal cabinet shelves | 15mm thick engineered wood shelf panels, laminate finish | |
| Frame foot pads | 20mm diameter non-slip plastic foot pads, adjustable for level | |
| Recessed tea tray area | Embedded black ABS plastic drain tray with slotted surface | |
| Tabletop edge trim | Smooth polished sintered stone edge, no protruding trim | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Integrated tea service zone | Recessed top section holds tea tray, with dedicated space for auto-fill electric boiler | |
|---|---|---|
| Left closed storage cabinet | Single enclosed cabinet door provides concealed storage for tea supplies | |
| Dual open cubby storage | Two upper open cubbies allow easy access to frequently used tea tools | |
| Right open slatted shelf | Full-width lower metal slat shelf holds tea canisters, books or accessories | |
| Integrated appliance placement | Dedicated tabletop zone supports electric glass kettle and tea sterilizer | |
| Non-marking floor protection | Plastic foot pads prevent floor scratches and allow minor level adjustment | |
| Stain-resistant tabletop | Non-porous sintered stone surface allows quick wipe-clean of tea spills | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room sofa front placement | Positioned in front of sofa to serve tea while seated at standard sofa height | |
|---|---|---|
| Home tea room setup | Used for daily kung fu tea preparation with integrated appliance and storage space | |
| Apartment small lounge area | Fits compact open-plan living spaces with combined storage and surface function | |
| Office reception lounge | Placed in reception areas to serve guests with organized tea service supplies | |
| Balcony casual tea space | Suits covered balcony areas for casual tea drinking with easy-access storage | |
| Recommended matching furniture | Pairs with 450 mm seat height floor cushions or low tea stools |
EU Market Access Requirements* EN Standards
| Furniture structural stability | EN 12521:2015 | |
|---|---|---|
| Surface emission limit | EN 13986:2004 |
Standards applicable to China-market projects
| Tabletop material safety | GB 6566 | |
|---|---|---|
| Furniture structural safety | GB/T 3324 | |
| Furniture surface durability | GB/T 4893.1 |
This product must meet the following technical requirements: 1. Tabletop material safety: GB 6566; 2. Furniture structural safety: GB/T 3324; 3. Furniture surface durability: GB/T 4893.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
