| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2200 x 800 x 750 mm | |
|---|---|---|
| Sintered stone tabletop thickness | 20 mm | |
| Tea appliance recess cutout size | 370 x 200 mm | |
| Pedestal width per support | 300 mm | |
| Central knee clearance height | 620 mm | |
| Central knee clearance width between pedestals | 1600 mm | |
| Left storage cabinet internal height | 500 mm | |
| Tabletop edge radius | 20 mm | |
| Pedestal base height from floor | 730 mm | |
| Tea tray channel length | 600 mm | |
| Floor clearance under tabletop overhang | 700 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop uniform static load capacity | 260 kg | |
|---|---|---|
| Integrated electric kettle capacity | 1.2 L | |
| Integrated sterilizer/rinse pot capacity | 0.8 L | |
| Kettle boiling time to 100°C | 3 minutes | |
| Sintered stone surface heat resistance | 1200 °C | |
| Recommended number of seated users | 5 | |
| Internal water bucket storage capacity | 18.9 L | |
| Product net weight | 100 kg | |
| Structural warranty period | 3 years | |
| Reference Static Load | 150 kg depending on category |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | 20mm polished sintered stone, marble-look light grey veined finish | |
|---|---|---|
| Pedestal outer frame | 1.5mm thick brushed stainless steel with vertical fluted detailing | |
| Pedestal internal cabinet | 18mm E0-grade engineered wood panel with moisture-resistant laminate | |
| Cabinet door hinge hardware | Stainless steel soft-close concealed hinges | |
| Tabletop edge finish | Polished and rounded sintered stone, no sharp exposed edges | |
| Pedestal bottom foot pads | 5mm thick non-slip rubber pads | |
| Tea appliance recess trim | Matte black stainless steel edge trim | |
| Internal water supply tubing | Food-grade silicone tubing, BPA-free | |
| Drainage fitting | Stainless steel 304 drain outlet connected to waste water tank | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Integrated auto-fill tea system | One-button automatic water feed, 3 temperature presets (85/95/100°C) for different tea types | |
|---|---|---|
| Hidden pedestal storage | Left enclosed cabinet houses clean water bucket, waste water tank, and power adapter | |
| Recessed drainage system | Built-in drain directs rinse water from sterilizer to internal waste tank without exposed pipes | |
| Multi-side seating access | Open central knee space allows seating along both long edges and short guest side | |
| Power cord management | Internal cable routing channels hide power cords from tea appliance to wall outlet | |
| Heat-resistant work surface | Sintered stone top supports direct placement of hot kettles and teapots without heat mats | |
| Stain-resistant surface finish | Non-porous sintered stone surface resists tea stains and allows easy wipe cleaning | |
| Leveling adjustment | Base foot pads adjust 10mm to compensate for uneven floor surfaces | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Office reception area | Serves as guest tea reception station for meeting rooms and executive offices | |
|---|---|---|
| Living room casual tea space | Fits modern residential interiors for daily tea preparation and family use | |
| Private tea room | Functions as dedicated tea ceremony table for hobbyist and commercial tea spaces | |
| Balcony leisure area | Suitable for compact covered balcony spaces for relaxed small-group tea service | |
| Executive lounge space | Pairs with upholstered guest seating for informal business discussions over tea |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic tables, applicable to structural performance | |
|---|---|---|
| EN 60335-2-15:2002 | Safety for household heating appliances, applicable to integrated kettle/sterilizer | |
| EN 13722:2004 | Furniture surface resistance to dry/wet heat, applicable to tabletop finish testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal cabinet panels | |
|---|---|---|
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable to engineered wood structural components | |
| GB 4706.1-2005 | Safety of household electrical appliances, applicable to integrated tea heating appliance | |
| GB 6566-2010 | Limit of radionuclides in building materials, applicable to sintered stone tabletop |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal cabinet panels; 2. GB/T 4897.3-2003: Particleboard for furniture use, applicable to engineered wood structural components; 3. GB 4706.1-2005: Safety of household electrical appliances, applicable to integrated tea heating appliance; 4. GB 6566-2010: Limit of radionuclides in building materials, applicable to sintered stone tabletop; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
