| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 800 x 750 mm | |
|---|---|---|
| Sintered stone tabletop segment thickness | 15 mm | |
| Wood tabletop segment thickness | 50 mm | |
| Left cylindrical pedestal diameter | 400 mm | |
| Right open curved metal leg clearance height | 680 mm | |
| Integrated tea service zone width | 600 mm | |
| Tabletop edge radius | 50 mm | |
| Right leg frame tube diameter | 50 mm | |
| Under-table cross-brace height | 120 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 200 kg | |
|---|---|---|
| Sintered stone heat resistance | 1200 °C | |
| Sintered stone surface Mohs hardness | 9 | |
| Recommended seating capacity | 3 people | |
| Metal frame rust protection service life | 5 years | |
| Anti-slip foot pad load distribution | 200 kg per unit | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| White tabletop segment | 15mm matte white sintered stone | |
|---|---|---|
| Rear wood tabletop segment | 50mm walnut-toned solid wood veneer over MDF core | |
| Left support pedestal | 2mm thick matte black powder-coated carbon steel cylinder | |
| Right support frame | 50mm diameter matte black welded carbon steel tubing | |
| Tabletop edge banding | Black PVC edge trim matching frame finish | |
| Bottom foot pads | Non-slip scratch-resistant TPE rubber pads | |
| Frame surface finish | Anti-fingerprint matte black powder coating | |
| Optional tea boiler cutout | Pre-drilled 180mm diameter opening for built-in induction cooker | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Dedicated integrated tea serving zone | Left tabletop area sized for full tea set placement | |
|---|---|---|
| Knee clearance under right frame | 680mm vertical clearance for unobstructed seated leg room | |
| Rounded edge safety design | 50mm radius rounded corners eliminate sharp impact points | |
| Stable asymmetric support structure | Left solid cylinder + right open frame eliminates wobble on level floors | |
| Floor protection function | TPE foot pads prevent hard frame contact with carpet or hard flooring | |
| Heat-resistant work surface | Sintered stone segment supports direct placement of hot tea kettles | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Office reception area | Fits 3-person tea service for visitor hospitality | |
|---|---|---|
| Executive private office | Matches professional light luxury aesthetic for informal meetings | |
| Residential living room tea nook | Low-profile modern design fits contemporary home decor | |
| Commercial tea house booth | Durable surface withstands frequent daily tea service use | |
| Small meeting lounge | Supports casual discussion while serving beverages |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Safety requirements for non-domestic furniture tables, applicable for commercial reception use | |
|---|---|---|
| EN 12521:2015 | Strength and durability requirements for domestic tables, applicable for structural validation | |
| EN 13722:2004 | Surface resistance to dry heat for furniture finishes, applicable to tabletop performance |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk products standard, applicable for commercial office reception table use | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Storage and accessories support, applicable to tabletop static load validation |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood tabletop segments | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard for furniture use, applicable to wood segment core material | |
| GB 6566-2010 | Radionuclide limits for building materials, applicable to sintered stone panels | |
| GB/T 17657-2013 | Surface property test methods for wood-based panels, applicable to finish testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood tabletop segments; 2. GB/T 4897.3-2015: Particleboard for furniture use, applicable to wood segment core material; 3. GB 6566-2010: Radionuclide limits for building materials, applicable to sintered stone panels; 4. GB/T 17657-2013: Surface property test methods for wood-based panels, applicable to finish testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
