| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 700 x 570 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Embedded tea tray dimensions | 800 x 350 x 35 mm | |
| Induction cooker cutout size | 370 x 200 mm | |
| Drawer internal dimensions | 1000 x 500 x 120 mm | |
| Lower slatted shelf clearance | 220 mm | |
| Frame tube cross-section | 40 x 40 mm | |
| Adjustable foot height adjustment range | 15 mm | |
| Leg spacing (side to side) | 1180 mm | |
| Undertable knee clearance (front) | 450 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop static distributed load | 150 kg | |
|---|---|---|
| Lower slatted shelf static load | 30 kg | |
| Drawer maximum static load | 15 kg | |
| Induction cooker maximum power | 1600 W | |
| Product net weight | 70 kg | |
| Design service life (commercial use) | 8 years | |
| Boil time for 1L water | 6 minutes | |
| Warranty period | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 30mm thick fired natural slate with matte black finish | |
|---|---|---|
| Embedded tea tray | Matching fired slate slotted surface with 201 stainless steel drain pan | |
| Support frame | 1.2mm thick Q235 carbon steel tube with matte gray powder coating | |
| Drawer panel | 18mm thick particle board with light oak wood grain laminate | |
| Drawer handle | Polished aluminum alloy horizontal pull handle | |
| Lower storage shelf | 15mm diameter parallel carbon steel slats with matching powder coat | |
| Adjustable feet | Nylon-tipped galvanized steel adjustable leveling feet | |
| Drainage fitting | Food-grade silicone drain hose with 1m length | |
| Induction cooker panel | 4mm thick black tempered heat-resistant glass | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Integrated drainage tea system | Slotted tray collects wastewater and routes to external bucket via hose | |
|---|---|---|
| Built-in induction heating | Recessed cooker heats stainless steel kettle for boiling water | |
| Automatic water feed | Integrated pump draws water from bottled source to fill kettle | |
| Central drawer storage | Full-width soft-close drawer stores tea tools and tea caddies | |
| Open lower shelf storage | Parallel steel slats hold tea cups, tea canisters and accessories | |
| Floor leveling adjustment | Four corner feet adjust individually to stabilize on uneven floors | |
| Flush integrated design | Tea tray and cooker sit flush with tabletop for easy cleaning | |
| Cable management | Rear cord channel routes power cord for induction unit to wall outlet | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room sofa front placement | Positioned facing seating area for casual home tea service | |
|---|---|---|
| Office reception area use | Suitable for executive lounge and visitor reception tea service | |
| Private tea room installation | Compact size fits small dedicated tea tasting spaces | |
| Seating capacity for use | Serves up to 6 people seated around the table for tea | |
| Recommended accessory pairing | Compatible with standard 1L stainless steel kettle and porcelain tea sets | |
| Flooring suitability | Nylon feet prevent scratching on tile, wood and polished stone floors |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Safety strength requirements for domestic tables, applicable to table structure | |
|---|---|---|
| EN 60335-2-9:2019 | Safety for household cooking appliances, applicable to induction unit | |
| EN 16121:2013 | Storage furniture safety requirements, applicable to drawer assembly |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to drawer components | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements, applicable to steel frame | |
| GB 4706.1-2005 | Safety of household electrical appliances, applicable to induction cooker | |
| GB/T 19001-2016 | Quality management system reference for commercial furniture production |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to drawer components; 2. GB/T 3325-2017: Metal furniture general technical requirements, applicable to steel frame; 3. GB 4706.1-2005: Safety of household electrical appliances, applicable to induction cooker; 4. GB/T 19001-2016: Quality management system reference for commercial furniture production; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
