| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2600 x 900 x 730 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Left side storage cabinet dimensions | 600 x 900 x 730 mm | |
| Vertical slatted metal support panel height | 680 mm | |
| Central stone support leg dimensions | 150 x 150 mm | |
| Right metal end leg section size | 50 x 50 mm | |
| Undertable knee clearance height | 660 mm | |
| Clear floor space between support legs | 1800 mm | |
| Matching low stool overall dimensions | 380 x 380 x 420 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Tabletop static uniform load capacity | 120 kg | |
|---|---|---|
| Tabletop heat resistance for hot teaware | 180 °C | |
| Tabletop surface abrasion resistance | 6000 revolutions | |
| Product net weight (table only) | 110 kg | |
| Stable assembly cycle rating | 200 cycles | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 20mm dark sintered stone with polished finish, scratch and stain resistant | |
|---|---|---|
| Left cabinet carcass | 18mm E0 grade particle board with matte light off-white laminate | |
| Left vertical slat support panel | 20x20mm powder-coated dark carbon steel slats, evenly spaced | |
| Table support legs (outer) | 50x50mm square tubular carbon steel with brushed dark gunmetal finish | |
| Central support column | Matched dark sintered stone cladding over steel inner core | |
| Stool seat cushion | 40mm high-density polyurethane foam (35kg/m³) with cream faux leather upholstery | |
| Stool frame | 12mm diameter tubular carbon steel with dark powder-coated finish, circular foot ring | |
| Table edge trim | 1mm thick polished stainless steel edge banding around tabletop perimeter | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Fixed frame construction | Welded and bolted modular frame, no height adjustment or moving parts | |
|---|---|---|
| Left cabinet enclosed storage | Single closed cabinet compartment with internal adjustable shelf for tea supply storage | |
| Flat tabletop layout | Continuous unbroken surface sized to arrange full tea service, kettle and teaware sets | |
| Multi-position seating access | Open leg bays support seating for 1 host armchair and up to 4 low stools around perimeter | |
| Leveling foot adjustment | Threaded adjustable feet on each leg base, 15mm adjustment range for uneven floors | |
| Surface cleaning performance | Non-porous sintered surface allows wet wiping without staining from tea or liquid spills | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons per set (table only) | 3 | |
|---|---|---|
| Largest carton dimensions (tabletop) | 2680 x 980 x 80 mm | |
| Total shipping gross weight (table only) | 130 kg | |
| Total shipping volume (CBM) | 0.62 cbm | |
| On-site assembly time | 60 minutes | |
| Standard 40HQ container loading quantity | 60 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons |
Recommended spaces / users / usage modes
| Office reception tea area | Sized for executive office or meeting room guest tea reception seating up to 5 users | |
|---|---|---|
| Open plan living room tea space | Suitable for luxury residential living room casual tea service and display | |
| Private club tea lounge | Durable stone and metal construction supports daily commercial use in club hospitality spaces | |
| Balcony casual tea space | Rectangular layout fits covered balcony areas for small group casual tea drinking | |
| Recommended configuration pairing | Pair with 1 upholstered host armchair and 4 round low stools for complete functional set |
EU Market Access Requirements* EN Standards
| Furniture mechanical safety for tables | EN 15372:2016 | |
|---|---|---|
| Upholstered furniture seat flammability | EN 1021:2014 | |
| Surface resistance to dry heat | EN 12721:2009 |
Standards applicable to China-market projects
| Tabletop stone material safety | GB 6566 | |
|---|---|---|
| Formaldehyde emission for wood-based panels | GB 18580 | |
| Furniture mechanical stability | GB/T 10357.1 | |
| Metal furniture coating performance | GB/T 3325 |
This product must meet the following technical requirements: 1. Tabletop stone material safety: GB 6566; 2. Formaldehyde emission for wood-based panels: GB 18580; 3. Furniture mechanical stability: GB/T 10357.1; 4. Metal furniture coating performance: GB/T 3325; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
