| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 800 x 750 mm | |
|---|---|---|
| Sintered stone tabletop section dimensions | 1600 x 800 mm | |
| Recessed tea tray zone dimensions | 800 x 400 mm | |
| Tabletop total thickness | 61 mm | |
| Moon-gate circular leg cutout diameter | 180 mm | |
| Panel leg cross-section dimensions | 400 x 750 mm | |
| Under-table knee clearance height | 680 mm | |
| Table corner radius | 50 mm | |
| Long side seating clear width per position | 480 mm | |
| Short side seating clear width | 800 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static uniform load capacity | 200 kg | |
|---|---|---|
| Sintered stone surface heat resistance | 1200 °C | |
| Sintered stone surface scratch resistance (Mohs scale) | 6 | |
| Standard seating capacity | 5 people | |
| Product net weight | 120 kg | |
| Integrated tea boiler heating power | 1200 W | |
| Tea tray wastewater capacity | 2 L | |
| Integrated boiler auto water feed stroke | 1200 mm | |
| Surface finish wear resistance (wood frame) | 4000 cycles | |
| Reference Static Load | 150 kg depending on category |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main support frame | Solid oak with natural matte finish, 36mm thick support panels | |
|---|---|---|
| Tabletop primary inset | 25mm thick matte sintered stone, light grey marble pattern | |
| Recessed tea tray | 12mm thick black polished natural slate, flush inset to tabletop | |
| Integrated boiler housing | Food-grade 304 stainless steel heating element, heat-resistant plastic base | |
| Table edge banding | Solid wood matching frame, 50mm wide rounded edge profile | |
| Leg panel inner support | 18mm thick multi-layer solid wood plywood internal bracing | |
| Surface finish (wood components) | Environmentally friendly water-based polyurethane matte lacquer | |
| Non-slip foot pads | 8mm thick silicone rubber pads at each leg base | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Integrated electric tea boiler system | Auto water feed, 100°C boiling, constant temperatureKeep warmat 95°C | |
|---|---|---|
| Hidden wastewater drainage system | Gravity drain from tea tray to removable 2L bucket under table | |
| Fixed solid panel leg support | Two end panels with decorative moon-gate cutouts, no moving parts | |
| Integrated cable management | Hidden channel inside right leg for boiler power cord | |
| Heat-resistant tabletop surface | Sintered stone section withstands direct hot teapot placement without coasters | |
| Raised table edge lip | 5mm high lip around tea tray zone | |
| Under-table bucket storage clearance | 300mm high open space between legs for standard 18.9L water bucket | |
| Easy-clean surface design | Non-porous sintered stone and smooth wood finish wipe clean with damp cloth | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Private residential tea room | Fits dedicated tea ceremony spaces for daily home tea service and guest entertainment | |
|---|---|---|
| Office reception area | Suitable for executive reception spaces for hosting clients during business meetings | |
| Commercial tea house private booth | Meets durability requirements for light commercial tea venue daily use | |
| Open-plan living room tea zone | Works as dedicated tea preparation and seating area in modern open living spaces | |
| Clubhouse lounge common area | Appropriate for community or club lounge use for member gatherings | |
| Target user group | Tea ceremony enthusiasts, business reception users, household tea service users | |
| Recommended configuration | Pair with 1 host armchair and 4 guest side chairs, plus optional tea utensil storage cabinet |
EU Market Access Requirements* EN Standards
| EN 13722:2004 | Furniture – Tables – Test methods for strength, durability and stability | |
|---|---|---|
| EN 12524:2000 | Sintered stone furniture surfaces, performance requirements for scratch and heat resistance | |
| EN 71-3:2019 | Safety of furniture finishes, migration of certain elements for indoor use | |
| EN 60335-2-15:2019 | Safety of electric heating appliances for liquid heating, applies to tea boiler |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood frame construction | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture, applies to formaldehyde emission | |
| GB/T 4897.3-2015 | Particleboard for furniture use, applicable if engineered wood bracing is used | |
| GB 4706.1-2005 | Safety of household electrical appliances, applies to integrated electric tea boiler |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood frame construction; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, applies to formaldehyde emission; 3. GB/T 4897.3-2015: Particleboard for furniture use, applicable if engineered wood bracing is used; 4. GB 4706.1-2005: Safety of household electrical appliances, applies to integrated electric tea boiler; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
