| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Finished Top Thickness | 50 mm | |
|---|---|---|
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 185 kg | |
|---|---|---|
| Distributed desktop load | 80 kg | |
| Side return worktop load | 50 kg | |
| Drawer or cabinet shelf load | 25 kg per shelf or drawer | |
| Recommended user size | One executive user plus visitor interaction space | |
| Edge impact resistance | 2H pencil hardness and 20 N edge-load check | |
| Surface static heat tolerance | 80 degrees C for 20 minutes | |
| Hardware operating life | 50,000 drawer-slide or hinge cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Desktop substrate and veneer | Engineered-wood board overlaid with reddish-brown wood veneer, sealed with a glossy lacquered finish | |
|---|---|---|
| Edge and decorative trim | Stained wood or wood-composite molded trim with layered crown edge and raised panel framing | |
| Front panels | Veneered paneled modesty board with central carved medallion and framed recessed panels | |
| Side return cabinet | Veneered engineered-wood case with paneled doors or drawer fronts and matching plinth | |
| Hardware | Brass-tone or bronze-tone metal pulls and lock fittings | |
| Desk mat and surface protection | Black leather-look or synthetic leather writing mat inset on the main work surface |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| L-shaped work layout | Main 2400 mm desk and 1800 mm return create a primary work zone plus secondary document, meeting, or equipment zone | |
|---|---|---|
| Storage and knee-bay arrangement | The left return provides a 1200 mm cabinet zone while the central front opening preserves a 700 mm knee bay | |
| Cable and equipment planning | Desktop supports laptop or monitor placement; a 60 mm grommet and under-top cable tray should be specified because no factory outlet is visible | |
| Locking storage provision | Traditional pedestal front accepts one central drawer lock and individual door or drawer lock cylinders |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Total gross weight | 210 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office | Suits a private manager or director office where the L-shaped top supports a computer, documents, signing area, and visitor-facing desk mat | |
|---|---|---|
| Recommended configuration | Pair with a high-back leather executive chair on the work side and two visitor chairs on the open front, leaving 900 mm circulation behind the return |
EU Market Access Requirements* EN Standards
| Office furniture safety | EN 527and EN 527 | |
|---|---|---|
| Surface and structural verification | EN 1730 | |
| Wood-panel emissions specification | EN 13986 |
Standards applicable to China-market projects
| Dimensional and structural acceptance | GB/T 3324 and GB/T 3325 | |
|---|---|---|
| Formaldehyde emission control | GB 18580 | |
| Surface film performance | GB/T 4893.1 through GB/T 4893.9 |
This product must meet the following technical requirements: 1. Dimensional and structural acceptance: GB/T 3324 and GB/T 3325; 2. Formaldehyde emission control: GB 18580; 3. Surface film performance: GB/T 4893.1 through GB/T 4893.9; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
