| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1200 x 700 x 500 mm | |
|---|---|---|
| Tabletop thickness | 80 mm | |
| Lower shelf clearance height | 170 mm | |
| Lower shelf usable dimensions | 700 x 560 mm | |
| Pedestal panel width | 180 mm | |
| Pedestal plinth base height | 60 mm | |
| Bullnose edge radius | 25 mm | |
| Under-table floor clearance | 20 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Tabletop distributed static load | 50 kg | |
|---|---|---|
| Lower shelf static load | 25 kg | |
| Product net weight | 45 kg | |
| Surface finish abrasion resistance | 2000 cycles | |
| Recommended user capacity | 4 people | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop | High-gloss reddish-brown wood veneer over MDF substrate | |
|---|---|---|
| Pedestal supports | Wood-veneer engineered wood panels with matching plinth bases | |
| Lower storage shelf | Fixed engineered wood panel with matching wood veneer | |
| Surface finish | High-gloss PU lacquer topcoat, 0.2mm coating thickness | |
| Connection hardware | Steel dowels and confirmat screws, 5mm diameter | |
| Edge Band Thickness | 2 mm |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Storage configuration | Fixed open lower shelf for temporary placement of magazines, cups or documents | |
|---|---|---|
| Edge safety design | Full perimeter rounded bullnose edges to eliminate sharp corner impact risks | |
| Stability design | Wide molded plinth bases on each pedestal to prevent tipping under uneven load | |
| Surface maintenance | Non-porous glossy finish allows wet-wipe cleaning with soft cloth and mild detergent |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Reception lounge placement | Positioned in front of reception seating for tea service and document placement | |
|---|---|---|
| Executive office side placement | Placed adjacent to executive seating sets for guest refreshment service |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Strength, durability and safety requirements for non-domestic office tables | |
|---|---|---|
| EN 13722:2004 | Surface resistance assessment for office furniture finishes |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to dimensional and structural acceptance | |
|---|---|---|
| GB 18584-2001 | Formaldehyde emission limit for interior decoration wood furniture, mandatory for indoor office use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dimensional and structural acceptance; 2. GB 18584-2001: Formaldehyde emission limit for interior decoration wood furniture, mandatory for indoor office use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
