| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall assembled dimensions | 600 x 600 x 540 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Lower shelf thickness | 18 mm | |
| Leg cross-section dimension | 60 x 60 mm | |
| Vertical clearance under tabletop apron | 320 mm | |
| Lower shelf vertical clearance from floor | 140 mm | |
| Tabletop rounded edge radius | 12 mm | |
| Apron frame height below tabletop | 80 mm | |
| Lower shelf usable depth | 520 mm | |
| Leg outer overhang from tabletop edge | 10 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Tabletop static load capacity | 30 kg | |
|---|---|---|
| Product net weight | 12 kg | |
| Standard limited warranty period | 1 year | |
| Available finish color count | 6 | |
| Surface abrasion resistance rating | 2000 cycles | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop panel | Solid hardwood with smooth sprayed walnut-toned lacquer finish | |
|---|---|---|
| Support legs | Solid hardwood with vertical molded groove detail and clear protective topcoat | |
| Lower storage shelf | Solid hardwood panel finished to match tabletop color and sheen | |
| Connecting apron frame | Solid hardwood rails joined at corners for structural rigidity | |
| Joinery hardware | Zinc-plated steel corner brackets and wood screws for knockdown assembly | |
| Edge Band Thickness | 2 mm |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Lower open shelf storage | Full-width open shelf provides accessible secondary storage for books, decor, or small items | |
|---|---|---|
| Tabletop utility surface | Flat square top supports table lamps, drinkware, potted plants, or office reception accessories | |
| Structural stability | Four evenly spaced thick legs deliver balanced stability on level hard floors | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room placement | Position beside sofas or armchairs to hold lamps, drinks, and reading materials | |
|---|---|---|
| Office reception area use | Place between reception seating to hold magazines, cups, and visitor accessories |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural safety and finish quality |
|---|
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural safety and finish quality; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
