| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1800 x 400 x 2000 mm | |
|---|---|---|
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 115 kg | |
|---|---|---|
| Single shelf static load capacity | 30 kg | |
| Storage capacity (file folders per shelf) | 22 | |
| Anti-tip safety load rating | 50 kg horizontal pull | |
| Door hinge cycle rating | 50000 open/close cycles | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Cabinet body panels | 18mm thick MDF core with cherry wood veneer, satin polyurethane finish | |
|---|---|---|
| Upper display doors | 5mm clear tempered glass set in wood veneer frames with routed arched top edge | |
| Lower and side solid doors | 18mm thick MDF core with matching wood veneer, raised arched panel molding | |
| Adjustable shelves | 25mm thick particleboard core with matching wood veneer, metal shelf pin supports | |
| Hardware components | Zinc alloy door hinges, keyed cam locks, metal shelf pins | |
| Top and base trim | Solid wood edge molding with matching stain finish |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Storage zoning | Upper three glass-door bays for open display, lower three bays plus right full-height door for concealed storage | |
|---|---|---|
| Shelf adjustability | Metal shelf pins support adjustable shelf height positions along pre-drilled cabinet holes | |
| Locking function | Keyed cam lock secures the right full-height door for private document storage | |
| Anti-tip protection | Wall anchor bracket included to secure cabinet to wall and prevent forward tipping |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office spaces | Fits behind executive desks for book, decor and confidential document storage | |
|---|---|---|
| Conference room perimeter storage | Provides display for awards and reference materials alongside locked supply storage |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety requirements for domestic and office storage furniture, applicable to structural stability checks | |
|---|---|---|
| EN 12521:2015 | Strength, durability and safety requirements for non-domestic storage furniture | |
| EN 1022:2018 | Stability test method for seating and storage furniture, applicable to anti-tip verification |
US and Canada office-furniture standards
| ANSI/BIFMA X5.9-2019 | Performance standard for office storage units, applicable to load and durability testing | |
|---|---|---|
| ANSI/BIFMA M7.1-2019 | Test method for structural stability of freestanding office furniture | |
| ANSI/BIFMA X5.1-2017 | General safety requirements for office furniture products |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to dimensional and structural quality checks | |
|---|---|---|
| GB/T 4893.1-2005 | Surface wear resistance test for furniture coatings, applicable to veneer finish durability verification | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable to formaldehyde emission testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dimensional and structural quality checks; 2. GB/T 4893.1-2005: Surface wear resistance test for furniture coatings, applicable to veneer finish durability verification; 3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to formaldehyde emission testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
