| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 2997 x 559 x 2380 mm | |
|---|---|---|
| Single vertical bay width | 999 mm | |
| Upper glass door section height | 1428 mm | |
| Lower solid door section height | 952 mm | |
| Crown molding height | 76 mm | |
| Base plinth height | 76 mm | |
| Glass door pane thickness | 5 mm | |
| Adjustable shelf count per upper bay | 3 | |
| Adjustable shelf thickness (upper display) | 25 mm | |
| Shelf vertical spacing (upper display) | 356 mm | |
| Lower cabinet internal shelf count | 1 | |
| Lower cabinet door raised panel thickness | 18 mm | |
| Door knob diameter | 30 mm | |
| Back panel thickness | 6 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Unit net weight | 253 kg | |
|---|---|---|
| Per shelf static load capacity (upper display) | 35 kg | |
| Hinge open angle per door | 110 degrees | |
| Hinge cycle rating | 80000 | |
| Anti-tip connector quantity | 2 | |
| Recommended maximum unit load | 450 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Carcass construction | Hardwood solids with cherry wood veneer over engineered wood core | |
|---|---|---|
| Upper door panels | 5mm clear tempered glass set in solid wood arched frames | |
| Lower door panels | Solid wood raised arched panels with matching cherry veneer finish | |
| Edge banding | 1mm matching wood veneer edge trim on all exposed shelf and carcass edges | |
| Door hardware | Zinc alloy round dark bronze knobs, concealed self-closing cabinet hinges | |
| Finish coating | Multi-step satin polyurethane clear coat, scratch-resistant top layer |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Shelf adjustability | Upper display shelves support 50mm incremental height adjustment via metal shelf pins | |
|---|---|---|
| Door operation | All 6 doors swing outward on concealed hinges for full interior access, with no protruding hardware | |
| Leveling adjustment | Integrated threaded foot levelers at base corners compensate for uneven floor surfaces | |
| Anti-tip safety | Included wall anchor straps secure top rear of unit to wall framing to prevent tip-over |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office interiors | Formal traditional styling matches classic cherry wood office furniture suites for executive workspaces | |
|---|---|---|
| Private library or study spaces | Mixed display and concealed storage supports book collections and decorative display |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and strength requirements for domestic and kitchen storage furniture, applicable for structural load verification | |
|---|---|---|
| EN 12521:2015 | Strength, durability and safety requirements for non-domestic storage furniture, applicable for commercial office use |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.9 Storage Units |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural stability and finish quality inspection | |
|---|---|---|
| GB/T 4893.4-2013 | Surface wear resistance test for furniture coatings, applicable for finish durability acceptance | |
| GB 28007-2011 | Safety requirements for children's furniture, applicable for anti-tip and edge safety in multi-use spaces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural stability and finish quality inspection; 2. GB/T 4893.4-2013: Surface wear resistance test for furniture coatings, applicable for finish durability acceptance; 3. GB 28007-2011: Safety requirements for children's furniture, applicable for anti-tip and edge safety in multi-use spaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
