| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| overall assembled dimensions | 900 x 420 x 2280 mm | |
|---|---|---|
| left column width | 400 mm | |
| right column width | 500 mm | |
| upper glass display compartment height | 1380 mm | |
| lower left solid door compartment height | 750 mm | |
| right full-height solid door compartment height | 2130 mm | |
| adjustable shelf count in glass section | 3 | |
| shelf spacing in glass section | 390 mm | |
| internal shelf count in solid door compartments | 3 | |
| internal shelf spacing in solid sections | 350 mm | |
| base plinth height | 90 mm | |
| top cornice trim height | 60 mm | |
| door panel thickness | 25 mm | |
| carcass panel thickness | 18 mm | |
| glass panel thickness | 5 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| single shelf static load capacity | 25 kg | |
|---|---|---|
| unit net weight | 90 kg | |
| door hinge open angle | 110 degrees | |
| hinge cycle rating | 80000 cycles | |
| recommended anti-tip anchor quantity | 2 | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| main carcass | Hardwood or wood veneer over engineered core, reddish-brown lacquer finish | |
|---|---|---|
| display door panel | 5mm tempered clear glass set in solid wood frame | |
| door panels | Raised solid wood panels with moulded edge trim | |
| hardware pulls | Vertical brushed antique metal pull handles, one per door | |
| internal shelves | 25mm thick engineered wood or solid wood shelves | |
| back panel | 9mm thick hardboard or plywood backing, finished to match exterior |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| door operation | Hinged swing doors with magnetic door catches for smooth closure | |
|---|---|---|
| shelf adjustability | Height-adjustable shelves in all compartments for flexible storage | |
| storage zoning | Upper glazed display zone + lower/right concealed storage zone for mixed use | |
| installation requirement | Wall-mounted anti-tip anchors required for safe floor-standing use |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| executive office use | Fits behind executive desks for document storage and decorative display | |
|---|---|---|
| private study use | Suitable for home study book and display item storage |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety requirements for domestic and office storage furniture, anti-tip compliance | |
|---|---|---|
| EN 312:2010 | Performance requirements for wood-based panels used in cabinet construction |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.9 Storage Units |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural quality checks | |
|---|---|---|
| GB/T 4893.4-2013 | Surface wear resistance test for furniture finishes, applicable for lacquer durability | |
| GB 18584-2001 | Formaldehyde emission limit for wooden furniture, applicable for indoor air safety |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural quality checks; 2. GB/T 4893.4-2013: Surface wear resistance test for furniture finishes, applicable for lacquer durability; 3. GB 18584-2001: Formaldehyde emission limit for wooden furniture, applicable for indoor air safety; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
