| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1200 x 400 x 2000 mm | |
|---|---|---|
| Single bay width | 400 mm | |
| Upper glass door zone height | 1350 mm | |
| Lower solid door zone height | 650 mm | |
| Upper display shelf count | 3 shelves per bay | |
| Adjustable shelf spacing (upper zone) | 330 mm | |
| Lower concealed storage compartment height | 600 mm | |
| Toe kick height | 50 mm | |
| Clear glass door panel thickness | 5 mm | |
| Wood door/panel thickness | 18 mm | |
| Edge band thickness | 1 mm | |
| Vertical metal handle length | 120 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Single adjustable shelf static load capacity | 30 kg | |
|---|---|---|
| Hinge open angle | 110 degrees | |
| Hinge cycle durability | 80000 open/close cycles | |
| Finish scratch resistance | 2000 abrasion cycles | |
| Product net weight | 85 kg | |
| Product warranty | 3 years | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Cabinet carcass | 18mm MDF/particleboard substrate with walnut wood veneer | |
|---|---|---|
| Upper door panels | 5mm clear tempered glass set in wood frames | |
| Lower door panels | 18mm engineered wood with raised solid wood veneer panels | |
| Internal shelves | 18mm matching walnut veneer engineered wood, metal shelf support pegs | |
| Hardware | Brushed nickel-finish zinc alloy vertical bar pulls, steel cabinet hinges | |
| Back panel | 5mm hardboard back panel for wall alignment |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Upper door access | Hinged clear glass doors for dust-protected display of books and decor | |
|---|---|---|
| Lower door access | Hinged solid wood doors for concealed storage of files and supplies | |
| Shelf adjustability | Upper shelves support 5-level height adjustment via metal peg holes | |
| Anti-tip safety | Compatible with 2 wall anchor brackets for secure wall mounting |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Number of shipping cartons | 3 | |
|---|---|---|
| Largest shipping carton dimensions | 2050 x 450 x 100 mm | |
| Total shipping gross weight | 95 kg | |
| Total shipping volume | 0.26 CBM | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office placement | Positioned behind executive desks for document and award display storage | |
|---|---|---|
| Study room storage | Used for home study book and collectible storage |
EU Market Access Requirements* EN Standards
| EN 14073-2:2004 | Office storage furniture safety requirements for tall cabinets | |
|---|---|---|
| EN 14074-2004 | Office furniture strength and durability test methods for storage units |
US and Canada office-furniture standards
| ANSI/BIFMA X5.9-2019 | Performance standard for office storage cabinets, applicable for load and durability |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural performance | |
|---|---|---|
| GB/T 4893.1-2021 | Surface wear resistance test method for furniture finishes | |
| GB 18584-2001 | Indoor decoration material formaldehyde emission limit for wood furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural performance; 2. GB/T 4893.1-2021: Surface wear resistance test method for furniture finishes; 3. GB 18584-2001: Indoor decoration material formaldehyde emission limit for wood furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
