| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall assembled dimensions | 1350 x 440 x 2200 mm | |
|---|---|---|
| Shelf usable depth | 380 mm | |
| Glass door section height | 1320 mm | |
| Lower solid door compartment height | 660 mm | |
| Right full-height solid door compartment width | 450 mm | |
| Left/middle glass door panel width | 450 mm per door | |
| Adjustable shelf spacing range | 320 mm | |
| Side panel thickness | 25 mm | |
| Tempered glass panel thickness | 4 mm | |
| Plinth base height | 80 mm | |
| Hinge door opening angle | 110 degrees | |
| Edge band thickness | 1 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Per shelf static load capacity | 30 kg | |
|---|---|---|
| Recommended maximum document storage capacity | 180 standard A4 ring binders | |
| Door hinge cycle rating | 80000 open/close cycles | |
| Net product weight | 95 kg | |
| Warranty period | 5 years | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Cabinet carcass | E1 grade wood particleboard/MDF core with walnut wood veneer | |
|---|---|---|
| Exterior finish | Low-odor reddish walnut matte polyurethane lacquer | |
| Upper door panels | 4mm clear tempered glass with solid wood framing | |
| Lower and right door panels | 25mm solid wood raised panel with framed edge detail | |
| Hardware pulls and locks | Brushed zinc alloy bar pulls with brass key cylinders on locked doors | |
| Hinges | Concealed cold-rolled steel damped soft-close hinges |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Storage zoning | Two upper glazed display zones, two lower closed zones, one full-height locked zone | |
|---|---|---|
| Shelf adjustability | 5mm pitch adjustable shelf supports for custom shelf height spacing | |
| Locking security | Keyed locks on middle lower door and right full-height door for confidential file storage | |
| Door operation | Outward-swinging hinged doors with soft-close damping to reduce impact noise |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office file storage | Suitable for manager/CEO offices to store confidential documents, reference books and decorative display items | |
|---|---|---|
| Administrative/finance department storage | Suitable for storing archived files, financial records and office supplies with lockable security |
EU Market Access Requirements* EN Standards
| EN 14073-2:2004 | Office furniture - Storage furniture - Part 2: Safety requirements, applicable for structural safety verification | |
|---|---|---|
| EN 14073-3:2004 | Office furniture - Storage furniture - Part 3: Test methods for stability and structure strength, applicable for load testing |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.9 Storage Units |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimension and structural stabilityAcceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture, applicable for formaldehyde emission check |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimension and structural stabilityAcceptance; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture, applicable for formaldehyde emission check; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
