| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall assembled dimensions | 1200 x 400 x 850 mm | |
|---|---|---|
| Leg height | 100 mm | |
| Top spill containment edge height | 20 mm | |
| Lower drawer internal dimensions (per drawer) | 520 x 340 x 120 mm | |
| Glass-fronted door compartment width (per door) | 360 mm | |
| Right solid door compartment width | 360 mm | |
| Adjustable shelf spacing in glass compartments | 280 mm | |
| Recessed kettle station dimensions | 360 x 300 mm | |
| Tempered glass door panel thickness | 5 mm | |
| Engineered wood carcass panel thickness | 18 mm | |
| Back panel thickness | 9 mm | |
| Solid wood edge banding thickness (doors/panels) | 6 mm | |
| Internal shelf thickness | 18 mm | |
| Kettle water spout height above cabinet top | 220 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Per shelf static load capacity | 25 kg | |
|---|---|---|
| Integrated kettle capacity | 1.2 L | |
| Anti-tip connector required quantity | 2 | |
| Hinge opening angle | 110 degrees | |
| Drawer slide cycle rating | 50000 cycles | |
| Hinge cycle rating | 80000 cycles | |
| Surface coating pencil hardness | 2H | |
| Product net weight | 52 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Cabinet carcass | E1-grade engineered wood with 0.6mm red wood veneer finish | |
|---|---|---|
| Middle door panels | 5mm clear tempered glass set in wood-framed doors | |
| Hardware pulls and legs | Polished chrome-plated steel with black non-slip rubber foot pads | |
| Surface coating | Scratch and heat-resistant water-based lacquer | |
| Integrated kettle | Food-grade 304 stainless steel body with plastic handle | |
| Edge banding | 6mm solid wood edge banding on door and panel perimeters |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Integrated tea making station | Recessed top-right position with auto water pump and front-facing control buttons for boil and fill functions | |
|---|---|---|
| Storage configuration | Two lower drawers, two glass-fronted display compartments, one right-side solid-door concealed storage section | |
| Adjustable shelving | Position-adjustable shelves in glass compartments to accommodate different tea set heights | |
| Soft-close hinges and slides | Damped hardware to prevent slamming of doors and drawers |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office pantry and break room use | Provides integrated hot water service and tea set storage for staff beverage preparation | |
|---|---|---|
| Conference room auxiliary service placement | Positioned against meeting room walls to supply tea service during meetings |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops - safety requirements, applicable to structural stability | |
|---|---|---|
| EN 13722:2004 | Furniture - strength and durability of storage furniture, applicable to load and cycle testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to dimensional tolerance and finish quality | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture, applicable to formaldehyde emission limits | |
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable to core panel structural performance requirements |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dimensional tolerance and finish quality; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture, applicable to formaldehyde emission limits; 3. GB/T 4897.3-2003: Particleboard for furniture use, applicable to core panel structural performance requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
