| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1824 x 550 x 900 mm | |
|---|---|---|
| Top surface thickness | 45 mm | |
| Plinth base height | 80 mm | |
| Central drawer internal dimensions | 760 x 380 x 120 mm | |
| Glass door panel size per door | 320 x 480 mm | |
| Solid side door width per door | 372 mm | |
| Adjustable shelf thickness in glass compartments | 18 mm | |
| Back panel thickness | 16 mm | |
| Clear glass panel thickness | 5 mm | |
| Carved decorative trim height below top | 25 mm | |
| Handle length (doors and drawer) | 120 mm | |
| Control panel strip length (top right) | 220 mm | |
| Internal shelf spacing in glass cabinets | 220 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Top surface static load capacity | 80 kg | |
|---|---|---|
| Paint surface pencil hardness | 2H | |
| Substrate formaldehyde emission | 0.05 mg/m³ | |
| Wood moisture content | 12% | |
| Door hinge cycle rating | 80000 open/close cycles | |
| Drawer slide cycle rating | 50000 open/close cycles | |
| Top surface load height clearance | 820 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Cabinet substrate | E1 grade MDF core | |
|---|---|---|
| Exterior surface | 0.6mm natural wood veneer with red-brown water-based paint | |
| Central door panels | 5mm clear tempered glass | |
| Hardware pulls and hinges | Brushed zinc alloy metal, nickel finish | |
| Plinth base | Solid wood veneered engineered wood | |
| Edge banding | 6mm solid wood edge trim |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Door storage access | Four hinged doors open to side solid storage and central display storage | |
|---|---|---|
| Central drawer access | Full-width lower central drawer on side-mount slides | |
| Integrated appliance control | Top-right button strip controls compatible integrated tea boiler functions | |
| Adjustable shelving | Two adjustable shelves in glass compartments |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office placement | Positioned against office wall near seating area for guest tea service | |
|---|---|---|
| Office pantry use | Installed in open or private pantries for tea set and supply storage |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and structural requirements for domestic and office storage furniture | |
|---|---|---|
| EN 312:2010 | Performance requirements for MDF panels used in cabinet construction |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural performance and finish quality | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, applicable to substrate material safety | |
| GB/T 4893.4-2013 | Surface paint film hardness and abrasion resistance test for furniture finishes |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural performance and finish quality; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, applicable to substrate material safety; 3. GB/T 4893.4-2013: Surface paint film hardness and abrasion resistance test for furniture finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
