Two-Tone Sliding Door 3-Drawer Low Storage Credenza (model SC-2SD3DR-800W) is listed under Traditional Office Sideboard, with overall dimensions of 1800 × 550 × 800 mm and main material of MDF. Load capacity: 110 kg. Certifications: Two-tone,finish,Sliding,door,storage,Plinth,base,pulls. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1800 x 550 x 800 mm | |
|---|---|---|
| Left sliding door section width | 1200 mm | |
| Right drawer bank width | 600 mm | |
| Individual drawer front height | 170 mm | |
| Plinth base height | 80 mm | |
| Outer frame thickness | 25 mm | |
| Interior shelf count (door section) | 1 | |
| Interior shelf thickness | 18 mm | |
| Recessed pull slot depth | 12 mm | |
| Interior door compartment depth | 520 mm | |
| Drawer internal depth | 500 mm | |
| Anti-tip anchor mounting height | 720 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Top surface static load capacity | 110 kg | |
|---|---|---|
| Drawer slide cycle rating | 50000 cycles | |
| Sliding door track cycle rating | 40000 cycles | |
| Assembly time | 50 minutes | |
| Product net weight | 62 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Cabinet core material | 18mm thick CARB-compliant MDF/particleboard | |
|---|---|---|
| Door and frame finish | Warm brown walnut wood veneer with clear matte lacquer | |
| Drawer and plinth finish | Matte dark grey polyurethane lacquer on MDF panels | |
| Hardware components | Powder-coated steel drawer glides and sliding door tracks | |
| Back panel material | 3mm thick hardboard backing | |
| Edge banding | 1mm thick PVC edge banding on concealed panel edges |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Door operation | Two left panels slide horizontally on top/bottom metal tracks | |
|---|---|---|
| Drawer operation | Three right drawers open via full-extension side-mount glides | |
| Shelf adjustability | Single interior shelf in door section adjusts to 5 height positions | |
| Anti-tip safety | Included steel wall anchor secures cabinet to wall studs |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room placement | Position against wall as media/side storage with display surface | |
|---|---|---|
| Dining room use | Serve as sideboard for tableware storage and serving surface |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units worktops safety requirements, applicable | |
|---|---|---|
| EN 312:2010 | Particleboard specifications for furniture and general use, applicable | |
| EN 12521:2015 | Domestic furniture strength durability safety for storage units, applicable |
US and Canada office-furniture standards
| ANSI/BIFMA X5.9-2019 | Storage furniture performance standard for commercial office use, optional | |
|---|---|---|
| ANSI/BIFMA e3-2019 | Furniture sustainability standard for material emissions and durability, optional |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural performance | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, applicable for indoor air safety | |
| GB/T 4897.3-2015 | Particleboard specifications for furniture use, applicable for core material quality |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural performance; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, applicable for indoor air safety; 3. GB/T 4897.3-2015: Particleboard specifications for furniture use, applicable for core material quality; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp