High-Back Tufted Black Faux Leather Executive Conference Armchair with Fixed Solid Wood Frame (model CF-WD-001-HB-FX) is listed under Wood Frame Side Chair, with overall dimensions of 635 × 686 × 1100 mm and main material of Imported Ash Solid Wood. Load capacity: 136 kg. Certifications: Fixed,stationary,structure,high-back,contoured,support,tufted,lumbar,design,curved,integrated,wood,armrests,four-leg,base. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 635 x 686 x 1100 mm | |
|---|---|---|
| Seat width | 616 mm | |
| Seat depth | 533 mm | |
| Seat height (from floor) | 470 mm | |
| Backrest height (from seat surface) | 630 mm | |
| Backrest width | 508 mm | |
| Armrest height (from seat surface) | 220 mm | |
| Armrest overall length (front to back) | 430 mm | |
| Front leg cross-section thickness | 45 mm | |
| Rear leg cross-section thickness | 40 mm | |
| Seat cushion thickness (padded surface) | 80 mm | |
| Floor glide diameter | 30 mm | |
| Under-seat knee clearance height | 470 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net product weight | 20 kg | |
|---|---|---|
| Recommended static load capacity | 136 kg | |
| Seat foam density | 36 kg/m³ | |
| Backrest foam density | 25 kg/m³ | |
| Foam rebound rate | 45% | |
| Foam compression set | 5.6% | |
| Upholstery tear strength | 100 N | |
| Wood frame moisture content | 10% | |
| Wood finish surface hardness | 2H | |
| Limited commercial warranty | 6 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Frame and armrest construction | Kiln-dried solid hardwood with mortise-and-tenon joinery | |
|---|---|---|
| Upholstery material | 1.5 mm thick black faux leather (vinyl/PU) | |
| Seat support panel | 12 mm thick E0-grade plywood | |
| Padding material | High-resilience polyurethane CMHR foam | |
| Foot glide material | Chrome-finish metal with non-marking rubber base | |
| Surface finish on wood parts | 2H hardness water-based wood stain and clear lacquer |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating adjustment | Fixed non-adjustable seat height with no tilt, swivel or recline mechanisms | |
|---|---|---|
| Mobility design | Stationary design with metal floor glides to protect hard floors | |
| Lumbar support | Integrated button-tufted contoured lumbar zone in backrest padding | |
| Arm support | Fixed continuous curved solid wood armrests extending from back frame to front seat rail |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive conference room seating | Formal high-back design for boardroom and leadership meeting spaces | |
|---|---|---|
| Guest and visitor reception areas | Fixed sturdy frame suitable for executive reception and waiting zones |
EU Market Access Requirements* EN Standards
| EN 1335-2:2018 | Safety requirements for non-domestic office seating, applies to fixed conference chairs | |
|---|---|---|
| EN 1335-3:2018 | Test methods for structural strength and durability of office seating | |
| EN 1022:2018 | Stability test standard for domestic and non-domestic seating |
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 | Safety and performance standard for general purpose office chairs | |
|---|---|---|
| ANSI/BIFMA e3-2019 | Sustainability standard for furniture, applicable for commercial office seating |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood office seating | |
|---|---|---|
| GB/T 16799-2008 | Performance specification for polyurethane leather used in furniture upholstery | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture for indoor use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood office seating; 2. GB/T 16799-2008: Performance specification for polyurethane leather used in furniture upholstery; 3. GB 18584-2001: Limit of harmful substances in wooden furniture for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp