| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1651 x 889 x 838 mm | |
|---|---|---|
| Seat height from floor | 419 mm | |
| Seat depth at deepest point | 610 mm | |
| Tall end backrest height | 838 mm | |
| Low end backrest height | 686 mm | |
| Leg height | 152 mm | |
| Seat cushion thickness | 127 mm | |
| Backrest thickness at padded edge | 76 mm | |
| Leg base spread | 1575 x 813 mm | |
| Arm wrap height at ends | 635 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Static weight capacity | 150 kg | |
|---|---|---|
| Product net weight | 35 kg | |
| Foam density (seat cushion) | 35 kg/m³ | |
| Foam rebound rate | 60% | |
| Fabric abrasion resistance (Martindale) | 30000 rubs | |
| Seam stitch pitch | 8 stitches per 30 mm | |
| Leg static load per leg | 75 kg | |
| Standard warranty period | 6 months | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Upholstery fabric | Caramel rust velvet with matching contrast edge stitching | |
|---|---|---|
| Seat cushion fill | High-density polyurethane foam wrapped in polyester fiber | |
| Internal frame | Mixed solid hardwood and engineered plywood, 25mm thick core | |
| Leg construction | 12mm diameter polished gold plated tapered steel stiletto legs | |
| Backrest fill | 28 kg/m³ density polyurethane foam with Dacron wrap | |
| Fastening hardware | Zinc-plated steel screws and insert nuts for leg attachment | |
| Edge trim | Self-fabric piped edging along curved frame seams | |
| Foot pads | Non-marking polyethylene floor protection caps on each leg end | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Single-person reclined fixed-position lounge seating | |
|---|---|---|
| Assembly requirement | Attach four legs to pre-installed frame inserts with included hardware | |
| Back support profile | Continuous curved wrapped support sloping from tall end to low end | |
| Integrated armrests | Fully enclosed wrapped armrests integrated into both frame ends | |
| Floor protection | Non-slip non-marking foot pads prevent hard floor scratching | |
| Recline angle (seat to back) | 110 degrees | |
| Color option availability | Multiple velvet upholstery color options per category standard | |
| Cleaning method | Spot clean with water-free upholstery solvent | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Living room lounge placement | Position against feature wall as standalone accent seating for modern glam interiors | |
|---|---|---|
| Bedroom relaxation seating | Place at foot of bed or in dressing nook for relaxed personal seating | |
| Boutique reception area use | Install in upscale boutique waiting areas for decorative guest seating | |
| Home lounge nook setup | Pair with small side table in reading corners for casual reclined use | |
| Residential open plan spaces | Use as sculptural accent piece in open concept living zones | |
| Styled photoshoot setting | Suitable for home staging and interior design styled photography sets |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Domestic furniture seating strength and durability testing standard | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignitability resistance to smouldering cigarette |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to frame structure inspection | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, for indoor air quality compliance | |
| GB/T 19833-2023 | Furniture mechanical strength test method, applicable for static load verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to frame structure inspection; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, for indoor air quality compliance; 3. GB/T 19833-2023: Furniture mechanical strength test method, applicable for static load verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
