| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 3200 x 2800 x 750 mm | |
|---|---|---|
| Single sofa module seat width | 1200 mm | |
| Single sofa module seat depth | 600 mm | |
| Seat height from floor | 450 mm | |
| Backrest height above seat | 300 mm | |
| Occasional side table top size | 450 x 450 mm | |
| Occasional side table height | 600 mm | |
| Table leg tubing diameter | 25 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Single sofa module seat static load | 200 kg | |
|---|---|---|
| Side table top static load | 30 kg | |
| Total set seating capacity | 4 persons | |
| Foam density reference | 35 kg/m³ | |
| Single sofa module weight | 35 kg | |
| Side table unit weight | 6 kg | |
| Seat foam density | 35 kg/m³ | |
| Back foam density | 28 kg/m³ | |
| Upholstery abrasion resistance | 50000 rubs | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back cushions | High-density polyurethane foam core with fabric or faux-leather upholstery | |
|---|---|---|
| Module internal frame | Plywood and solid wood sub-frame inside upholstered base | |
| Module base underside | Black fabric dust cover with non-slip feet | |
| Side table frame | Powder-coated round steel tubing in white finish | |
| Side table top | Wood-based composite panel with light wood-veneer or laminate surface | |
| Upholstery seams | Sewn seam construction joining cushion panels | |
| Module inner support structure | Sinuous steel spring base under seat foam for load distribution | |
| Edge trim of sofa modules | Injected molded foam edge reinforcement on all module corners | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Modular reconfiguration | Units can be arranged into L-shapes, parallel face-to-face sets or straight runs by repositioning freestanding modules | |
|---|---|---|
| Angled backrest geometry | Slightly faceted backrest follows the angled seat plan to support semi-circular or corner conversation layouts | |
| Side table placement | Lightweight square tables fit between or beside sofa modules for drinks, magazines and personal items | |
| Low-profile lounge posture | 450 mm seat height supports relaxed cross-legged or leaning seating for short-stay waiting and informal meetings | |
| Contract-grade durability intent | Foam core and upholstered construction intended for medium-traffic public and office common areas | |
| Tool-free deployment | Modules and tables arrive fully upholstered and assembled, requiring only placement and orientation on site | |
| Fixed angled backrest | Slightly faceted backrest follows the angled seat plan with a 105 degree fixed seat-back angle to support semi-circular or corner conversation layouts | |
| Relaxed lounge posture support | 450 mm seat height with 120 mm thick high-density foam supports relaxed cross-legged or leaning seating for short-stay waiting and informal meetings | |
| Medium-traffic durability | 35 kg/m³ seat foam and 50000 rub abrasion resistant upholstery are engineered for medium-traffic public and office common areas | |
| Tool-free on-site deployment | Modules and tables arrive fully upholstered and pre-assembled, requiring only placement and orientation on site | |
| Floor surface protection | PVC non-slip feet on the base underside prevent horizontal sliding and reduce scuffing on hard floor finishes | |
| Cushion shape retention | High-density polyurethane foam core with silk cotton wrapping maintains cushion shape after 50000 compression cycles |
Verified carton / gross weight / assembly / loading data
| Packaging configuration | 6 cartons total (4 sofa module cartons + 2 table cartons) | |
|---|---|---|
| Sofa module carton size | 1250 x 650 x 480 mm | |
| Sofa module gross weight | 38 kg per carton | |
| Side table carton size | 500 x 500 x 650 mm | |
| Side table gross weight | 8 kg per carton | |
| Total shipment volume | 1.9 CBM | |
| On-site assembly time | 20 minutes | |
| 20ft container loading quantity | 80 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Office reception and waiting areas | Suitable for corporate lobbies and visitor waiting zones where flexible seating and clean modern aesthetics are required | |
|---|---|---|
| Open-plan office breakout zones | Recommended for informal meeting and relaxation areas inside open workplaces | |
| Education and co-working lounges | Appropriate for university common areas and co-working spaces with medium daily traffic | |
| Exhibition and event temporary lounges | Useful for trade show booths and pop-up venues due to tool-free layout changes and lightweight modules | |
| Hotel and retail public spaces | Fits contemporary hotel corridors, atriums and retail rest areas where visual cohesion and seating flexibility are priority | |
| Auto dealership customer areas | Suitable for car showroom customer waiting and consultation areas that demand modern styling and flexible seating arrangements | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Upholstered furniture fire safety | EN 1021:2014 | |
|---|---|---|
| Furniture safety general requirements | EN 12520:2015 |
US and Canada office-furniture standards
| Seating durability for contract environments | ANSI/BIFMA X2020 | |
|---|---|---|
| Furniture sustainability | ANSI/BIFMA e2020 |
Standards applicable to China-market projects
| Upholstered furniture flammability | GB 20286 | |
|---|---|---|
| Furniture formaldehyde emission | GB 18580 | |
| Soft furniture mechanical safety | GB/T 10357.3 | |
| Public place furniture hygiene | GB/T 38605 |
This product must meet the following technical requirements: 1. Upholstered furniture flammability: GB 20286; 2. Furniture formaldehyde emission: GB 18580; 3. Soft furniture mechanical safety: GB/T 10357.3; 4. Public place furniture hygiene: GB/T 38605; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
