| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 950 x 840 mm | |
|---|---|---|
| Seat height from floor | 460 mm | |
| Seat depth at center | 700 mm | |
| Taller backrest cushion dimensions | 900 mm W x 750 mm H | |
| Shorter backrest cushion dimensions | 700 mm W x 600 mm H | |
| Plinth base height | 60 mm | |
| Seat cushion thickness | 220 mm | |
| Backrest cushion thickness | 180 mm | |
| Floor to bottom of seat rail clearance | 20 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total static weight capacity | 300 kg | |
|---|---|---|
| Per-seat static weight capacity | 150 kg | |
| Product net weight | 87 kg | |
| Seat foam density | 45 kg/m³ | |
| Foam rebound rate | 60% | |
| Fabric abrasion resistance | 50000 Martindale cycles | |
| Fabric weight | 580 g/m² | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
| Upholstery fabric | Woven polyester blend with red and blush chevron geometric pattern | |
|---|---|---|
| Seat cushion fill | High-resilience polyurethane foam wrapped in polyester batting | |
| Back cushion fill | Blend of polyurethane foam and shredded fiber for soft support | |
| Internal frame | 18 mm thick kiln-dried plywood with reinforced corner blocking | |
| Seat support system | 80 mm wide sinuous steel springs with 50 mm spacing | |
| Plinth base | Light natural oak-finished solid wood curved to match sofa silhouette | |
| Base edge protection | Felt floor protection pads along the plinth bottom | |
| Seam construction | Reinforced stitched seams with 8 stitches per inch | |
| Surface finish | Matte woven fabric finish with no applied coating | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Asymmetrical two-position curved seating with two independent rounded back cushions | |
|---|---|---|
| Assembly requirement | Minimal assembly required to attach plinth base to upholstered seat body | |
| Cushion retention | Integrated fixed seat cushion with attached back cushions to prevent shifting | |
| Weight distribution | Low curved plinth base distributes weight evenly to prevent floor indentation | |
| Edge design | Fully rounded soft upholstered edges with no exposed hard frame components | |
| Positioning flexibility | Curved form designed for floating placement in open living or lounge spaces | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living room | Ideal as statement seating for modern, contemporary or eclectic living spaces | |
|---|---|---|
| Boutique lounge area | Suitable for hotel lobbies, high-end retail lounges and creative office reception zones | |
| Open-plan living spaces | Designed for floating placement away from walls to showcase curved profile | |
| Styling use case | Pairs with low-profile round coffee tables and soft area rugs for cohesive modern lounge setups | |
| User capacity | Accommodates 2 adult occupants comfortably for extended seating | |
| Care and maintenance | Suitable for indoor low-moisture environments with regular fabric vacuuming |
EU Market Access Requirements* EN Standards
| EN 1022:2018 | Domestic furniture seating strength and stability testing standard | |
|---|---|---|
| EN 12520:2015 | Furniture strength, durability and safety requirements for domestic seating |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Lounge and public seating performance standard, applicable for commercial lounge deployment | |
|---|---|---|
| ANSI/BIFMA X5.1-2017 | General office chair testing reference for structural load validation when used in commercial spaces |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood plinth and frame construction | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for indoor air quality compliance | |
| GB/T 1952.1-2012 | Test methods for sofas, applicable for structural strength and durability verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood plinth and frame construction; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for indoor air quality compliance; 3. GB/T 1952.1-2012: Test methods for sofas, applicable for structural strength and durability verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
