| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2800 x 950 x 820 mm | |
|---|---|---|
| Seat height | 450 mm | |
| Seat depth | 680 mm | |
| Seat width per position | 800 mm | |
| Back cushion height | 480 mm | |
| Armrest width | 180 mm | |
| Armrest height | 620 mm | |
| Integrated side table dimensions | 600 x 600 x 250 mm | |
| Plinth base clearance above floor | 20 mm | |
| Back cushion thickness | 180 mm | |
| Seat cushion thickness | 220 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Per-seat static load capacity | 120 kg | |
|---|---|---|
| Foam compression set rate | 3% | |
| Fabric abrasion resistance | 40000 rub cycles | |
| Fabric lightfastness rating | Grade 4 | |
| Net weight | 120 kg | |
| Frame static load test | 150 kg per seat for 24 hours without permanent deformation | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat | |
| Upholstery Seam Pitch | 4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back outer upholstery | Two-tone matte woven fabric | |
|---|---|---|
| Seat cushion filling | 45kg/m³ high-resilience polyurethane foam | |
| Back cushion filling | 30kg/m³ polyurethane foam mixed with down fiber | |
| Internal frame | Kiln-dried solid pine with 1.5mm cold rolled steel reinforcement | |
| Plinth base construction | Multi-layer solid wood frame with matte finish | |
| Integrated side table top | Walnut wood veneer over high-density fiberboard | |
| Suspension system | 80mm wide elastic webbing spaced 50mm apart | |
| Seam construction | Reinforced stitched seams with 8mm stitch pitch | |
| Decorative throw pillows | Matching fabric covers filled with 25kg/m³ down poly blend | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
Adjustment / rotation / tilt / mobility / storage features
| Fixed straight configuration | Non-modular fixed layout with no reconfigurable sections | |
|---|---|---|
| Integrated side table surface | Fixed walnut wood platform extending from right armrest base | |
| Detachable cushion covers | Zippered cushion covers for removal and dry cleaning | |
| Plinth base support | Full perimeter low base with no protruding legs | |
| Deep lounge seating design | 680mm deep seat for relaxed reclined sitting posture | |
| Reversible seat cushions | Dual-sided usable seat cushions to extend service life | |
| Non-marking floor protection | Felt pads on base bottom to prevent hard floor scratching | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living room placement | Suitable for open-plan modern living rooms as primary seating | |
|---|---|---|
| Luxury apartment lounge use | Appropriate for high-end residential and show flat lounge areas | |
| Three-person casual seating | Designed for three adults to sit comfortably for relaxed conversation | |
| Low-height lounge configuration | Pairs with 350 mm high coffee tables for aligned sight lines | |
| Open space studio use | Works as central seating in open-plan studio and loft spaces | |
| Matching furniture recommendation | Pairs with low stone/wood coffee tables and soft area rugs |
EU Market Access Requirements* EN Standards
| EN 1022:2018 | Domestic furniture seating stability test standard |
|---|
Standards applicable to China-market projects
| GB/T 27007-2018 | Upholstered furniture fabric abrasion and pilling resistance classification |
|---|
This product must meet the following technical requirements: 1. GB/T 27007-2018: Upholstered furniture fabric abrasion and pilling resistance classification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
