| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 4200 x 1200 x 900 mm | |
|---|---|---|
| Seat unit width | 700 mm | |
| Seat depth | 600 mm | |
| Seat height | 450 mm | |
| Backrest height above seat | 450 mm | |
| Backrest thickness | 180 mm | |
| Integrated table top width | 700 mm | |
| Curved end table top radius | 600 mm | |
| Table top height | 650 mm | |
| Leg height | 120 mm | |
| Unit module count | 8 modules | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Seat static load capacity | 150 kg per seat unit | |
|---|---|---|
| Total system weight | 120 kg | |
| Fabric abrasion resistance | 50000 Martindale cycles | |
| Seat foam density | 40 kg/m³ | |
| Backrest foam density | 30 kg/m³ | |
| Total set net weight | 120 kg | |
| Upholstery fabric abrasion resistance | 50000 Martindale cycles | |
| Upholstery seam strength | 200 N per 50 mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and backrest upholstery | Woven polyester fabric in bright green | |
|---|---|---|
| Internal seat frame | Plywood and solid wood composite frame | |
| Seat padding | High-resilience polyurethane foam | |
| Backrest padding | Medium-density polyurethane foam | |
| Table tops | White high-pressure laminate (HPL) on particle board substrate | |
| Support legs | Chrome-plated steel tubular legs with black plastic floor glides | |
| Module connectors | Plastic or metal interlocking fasteners | |
| Internal seat and back frame | 15 mm thick plywood and solid wood composite frame with glued and stapled joint construction | |
| Seat cushion padding | High-resilience polyurethane foam with 40 kg/m³ density, wrapped in non-woven fabric liner | |
| Integrated table tops | 1 mm thick white high-pressure laminate (HPL) face bonded to 25 mm thick particle board substrate with PVC edge banding | |
| Module support legs | Chrome-plated carbon steel tubular legs with 30 mm outer diameter, fitted with black polyethylene floor glides | |
| Module connection hardware | Nylon and zinc-plated steel interlocking buckle fasteners |
Adjustment / rotation / tilt / mobility / storage features
| Modular reconfiguration | Units can be rearranged into multiple layouts including straight rows, S-curves, and partial circles | |
|---|---|---|
| Integrated work surfaces | Built-in table units placed between seat modules provide space for laptops, documents, and beverages | |
| Floor protection | Black plastic glides on each leg prevent scratching of hard floor surfaces and allow minor leveling | |
| Back-to-back seating option | Double-sided backrest units support seating on both sides in open-plan spaces | |
| Contract-grade durability | Constructed for high-traffic commercial environments with reinforced frame and abrasion-resistant upholstery | |
| Tool-free assembly | Modules connect via interlocking hardware without required on-site tools | |
| Modular layout reconfiguration | Units connect via interlocking fasteners to form multiple layouts including straight rows, S-curves, partial circles, and standalone islands | |
| Integrated casual work surfaces | Fixed-height table units installed between seat modules provide flat surfaces for laptops, documents, and beverage containers | |
| Double-sided seating support | Central backrest modules have padded upholstery on both front and rear faces to accommodate back-to-back seating arrangements | |
| Hard floor protection and minor leveling | 20 mm diameter polyethylene glides fixed to each leg bottom reduce floor scratching and allow ±2 mm of vertical adjustment on uneven floors | |
| Curved edge safety design | All end modules and table units have rounded curved edges with minimum 300 mm radius to eliminate sharp corners in high-traffic public spaces | |
| Tool-free module assembly | Pre-installed interlocking buckle hardware allows on-site module connection without specialized tools |
Verified carton / gross weight / assembly / loading data
| Packaging configuration | 8 individual cartons, one per module | |
|---|---|---|
| Total gross weight | 140 kg | |
| Total shipment volume | 3.6 CBM | |
| Total gross weight of full set | 140 kg | |
| On-site assembly time | 60 minutes | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
Recommended spaces / users / usage modes
| Office reception and waiting areas | Suitable for corporate lobbies and visitor waiting zones, providing casual seating with integrated work surfaces for short stays | |
|---|---|---|
| Open-plan office breakout zones | Ideal for informal team discussions and impromptu meetings in flexible work environments | |
| Educational facility common areas | Appropriate for university libraries, student lounges, and study commons with mixed seating and work requirements | |
| Public building waiting rooms | Suitable for healthcare clinics, government service halls, and transit station passenger areas | |
| Co-working space lounge areas | Fits flexible co-working layouts that alternate between relaxation, focused work, and group interaction | |
| Corporate office reception and waiting areas | Suitable for company lobbies and visitor waiting zones, providing casual seating with integrated work surfaces for short stays of 30 minutes | |
| Exhibition and event venue rest zones | Suitable for temporary rest areas in trade shows, museums, and event halls | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| Furniture safety - upholstered seating | EN 1728:2012 | |
|---|---|---|
| Flammability of upholstered furniture | EN 1021:2006 | |
| Strength, durability and stability of seating furniture | EN 1728:2012 | |
| Ignition resistance of upholstered furniture - cigarette test | EN 1021:2006 |
US and Canada office-furniture standards
| Seating durability and stability | ANSI/BIFMA X2020 | |
|---|---|---|
| Lounge seating performance standard | ANSI/BIFMA X2020 |
Standards applicable to China-market projects
| Upholstered furniture flammability | GB 20286 | |
|---|---|---|
| Formaldehyde emission for wood-based panels | GB 18580 | |
| Upholstered furniture flammability for public places | GB 20286 | |
| Formaldehyde emission limit for wood-based panels | GB 18580 |
This product must meet the following technical requirements: 1. Upholstered furniture flammability: GB 20286; 2. Formaldehyde emission for wood-based panels: GB 18580; 3. Upholstered furniture flammability for public places: GB 20286; 4. Formaldehyde emission limit for wood-based panels: GB 18580; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
