| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Finished Seat Cushion Thickness | 90 mm | |
|---|---|---|
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Seat static load capacity per position | 150 kg | |
|---|---|---|
| Sofa net weight | 85 kg | |
| Seat foam compression recovery rate | 92% | |
| Seam tensile strength | 120 N | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles | |
| Gas-lift Cycling Reference | Acceptance target 100000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Sofa and chair outer upholstery | Olive green matte velvet fabric, 300g/sqm | |
|---|---|---|
| Sofa seat cushion upholstery | Off-white matte velvet fabric, 300g/sqm | |
| Internal seating frame | Kiln-dried engineered hardwood, 25mm thick | |
| Seat cushion core | 40kg/m³ high-density polyurethane foam, 120mm thick | |
| Backrest cushion core | 30kg/m³ polyurethane foam wrapped with 50mm down blend | |
| Accent pillow fill | 100% blown polyester fiber, 250g fill per pillow | |
| Seating base support | Interwoven elastic webbing, 80mm wide | |
| Coffee table tabletop | Faux engineered stone, matte off-white finish, rounded edge | |
| Coffee table base and legs | Matte white painted MDF, cylindrical central leg and three side supports | |
| Upholstery stitching | Matching thread, 8mm stitch pitch | |
| Anti-slip floor pads | 5mm thick felt pads fitted under base perimeter | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
| Integrated curved armrest design | Fully upholstered wrap-around arms form enclosing bucket seat for armchairs | |
|---|---|---|
| Fixed non-reclining backrest | Permanently angled at 105 degrees from seat for relaxed lounge posture | |
| Loose reversible seat cushions | Removable cushions allow rotation for even wear over service life | |
| Movable lightweight seating units | Individual sofa and chair pieces can be repositioned to reconfigure lounge layouts | |
| Low-profile flush base design | No visible legs create a streamlined grounded organic silhouette | |
| Scratch-resistant table surface | Smooth non-porous faux stone top resists water rings and light abrasion | |
| Non-marring floor protection | Felt base pads prevent scuffing to polished hard floors and rugs | |
| Matching modular set configuration | Sofas, armchairs and tables are finished to coordinate for open lounge zoning | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Sofa carton dimensions | 2350 x 850 x 650 mm | |
|---|---|---|
| Single armchair carton dimensions | 870 x 820 x 620 mm | |
| Coffee table carton dimensions | 950 x 950 x 470 mm | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| High-end hotel lobby waiting areas | Soft curved forms create relaxed, welcoming zones for guest seating | |
|---|---|---|
| Premium office reception and breakout spaces | Low-profile design supports informal meetings and guest waiting | |
| Residential open-plan living rooms | Organic silhouette fits modern contemporary interior design schemes | |
| Luxury showroom customer waiting zones | Upholstered comfort provides extended seating for browsing clients | |
| Rooftop lounge and enclosed sunroom areas | Lightweight movable units support flexible layout changes for events | |
| Luxury beauty salon or spa waiting areas | Soft enveloping seats enhance relaxing customer experience prior to service | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
