Single-Row 4-Person Light Oak Open-Plan Bench Desk (model OBD-S4-LO-W-3200) is listed under Conference Table, with overall dimensions of 3200 × 800 × 750 mm and main material of Particle‑board (PB). Load capacity: 135 kg. Certifications: Minimalist,open,design,fixed-height,work,integrated,cable,management. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 3200 x 800 x 750 mm | |
|---|---|---|
| Per-workstation width | 800 mm | |
| Worktop thickness | 25 mm | |
| Worktop edge banding thickness | 2 mm | |
| Seated knee clearance height | 725 mm | |
| Seated knee clearance depth | 770 mm | |
| Leg profile cross-section | 30 x 30 mm | |
| Adjustable foot height adjustment range | 15 mm | |
| Cable grommet diameter | 80 mm | |
| Under-desk horizontal crossbar height | 100 mm | |
| Worktop overhang at front edge | 20 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total static load capacity | 135 kg | |
|---|---|---|
| Product net weight | 158 kg | |
| Static load per workstation | 34 kg | |
| Surface abrasion resistance | 6000 cycles | |
| Structural warranty period | 10 years | |
| Surface impact resistance | 1.5 J | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Worktop substrate | 18mm MFC (melamine-faced chipboard) with light oak finish | |
|---|---|---|
| Edge banding | 2mm PVC matching oak worktop finish | |
| Leg frame | Powder-coated white square steel tubing, 30x30mm cross-section | |
| Levelling feet | Injection-moulded nylon with steel threaded insert | |
| Cable grommets | ABS plastic with black brush insert | |
| Frame hardware | Zinc-plated steel bolts and connection brackets |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Cable management | Two recessed brush grommets route cables from desktop to under-desk space | |
|---|---|---|
| Levelling adjustment | Threaded adjustable feet on each leg correct uneven floor surfaces up to 15mm | |
| Workstation layout | Continuous single-row surface supporting 4 side-by-side seated users | |
| Modular connection | Frame connection points allow linking additional bench units for extended runs |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Largest carton dimensions | 3250 x 850 x 80 mm | |
|---|---|---|
| Total packaged gross weight | 174 kg | |
| Total packaged volume | 0.28 CBM | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Open-plan office work zones | Suitable for 4-person side-by-side seated work in collaborative office layouts | |
|---|---|---|
| Co-working and flexible office spaces | Modular design allows extension to longer bench runs for flexible seating plans |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Office worktables, safety and strength requirements for commercial office desks | |
|---|---|---|
| EN 527-2:2016 | Office worktables, mechanical safety and dimensional requirements for fixed-height desks | |
| EN 13722:2004 | Furniture, assessment of surface resistance to abrasion for worktop finishes |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk products standard, static load, stability and durability requirements for office desks | |
|---|---|---|
| ANSI/BIFMA e3-2019 | Applicable standards and test results require confirmation |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to worktop structural performance | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements, applicable to steel frame strength | |
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, required for indoor office use | |
| GB/T 10357.1-2013 | Furniture mechanical performance test for tables, static load and stability testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to worktop structural performance; 2. GB/T 3325-2017: Metal furniture general technical requirements, applicable to steel frame strength; 3. GB 18580-2017: Formaldehyde emission limits for wood-based panels, required for indoor office use; 4. GB/T 10357.1-2013: Furniture mechanical performance test for tables, static load and stability testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp