| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (clearance for use) | 2000 x 2000 mm | |
|---|---|---|
| Table overall dimensions | 900 x 900 x 750 mm | |
| Table base disc diameter | 600 mm | |
| Table pedestal stem diameter at narrowest point | 120 mm | |
| Table top thickness | 30 mm | |
| Chair overall dimensions (each) | 520 x 560 x 820 mm | |
| Chair seat height (without cushion) | 450 mm | |
| Chair seat width at widest point | 480 mm | |
| Chair seat cushion thickness | 40 mm | |
| Chair base disc diameter | 400 mm | |
| Backrest height above seat | 370 mm | |
| Knee clearance under table apron | 670 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total set net weight () | 85 kg | |
|---|---|---|
| Table top static load capacity | 50 kg | |
| Recommended maximum users | 4 people | |
| Chair swivel rotation range | 360 degrees | |
| Cushion foam density | 35 kg/m³ | |
| Seat cushion fabric abrasion resistance | 30000 Martindale cycles | |
| Maximum seating capacity | 4 people | |
| Seat cushion foam density | 35 kg/m³ | |
| Swivel mechanism cycle life | 12000 rotations | |
| Table weighted base disc diameter | 600 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table top | Glossy white gel-coated fiberglass-reinforced composite | |
|---|---|---|
| Table support structure | White powder-coated cast aluminum pedestal and base disc | |
| Chair shell | Glossy white molded fiberglass-reinforced composite | |
| Chair support stem and base | White powder-coated cast aluminum swivel stem and weighted round base disc | |
| Seat cushion padding | 40mm thick medium-density polyurethane foam | |
| Seat cushion upholstery | Woven red polyester fabric | |
| Table base bottom glides | Black non-marking felt or rubber floor protectors | |
| Swivel joint hardware | Zinc-plated steel bearing assembly | |
| Table support assembly | White powder-coated cast aluminum tapered pedestal and weighted base disc | |
| Chair support assembly | White powder-coated cast aluminum swivel stem and weighted round base disc | |
| Floor protection glides | Black non-marking 3mm thick rubber pads | |
| Assembly hardware | Zinc-plated steel bolts and threaded inserts |
Adjustment / rotation / tilt / mobility / storage features
| Table configuration | Single-central-pedestal round dining table with no peripheral legs | |
|---|---|---|
| Chair rotation function | 360-degree smooth swivel on enclosed bearing | |
| Seat cushion attachment | Recessed friction-fit removable cushion | |
| Surface maintenance | Non-porous high-gloss molded table and chair shell surfaces | |
| Floor protection | Full-width weighted base discs with non-marring glides | |
| Seating layout flexibility | Symmetrical round table design | |
| Table legroom design | Single-central-pedestal round table with no peripheral support legs | |
| Chair swivel operation | 360-degree friction-stabilized rotation on enclosed steel bearing | |
| Cushion mounting design | Recessed friction-fit removable seat cushion | |
| Surface cleaning performance | Non-porous high-gloss molded table and chair shell surfaces | |
| Floor protection system | Full-diameter weighted base discs with non-marring rubber glides | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 3 cartons | |
|---|---|---|
| Largest shipping carton dimensions | 950 x 950 x 120 mm | |
| Total shipping gross weight | 95 kg | |
| Total shipping volume (CBM) | 0.45 CBM | |
| Required assembly time | 40 minutes | |
| 40ft HQ container loading quantity | 120 sets | |
| Packaging protection | Expanded polystyrene foam edge protection, corrugated cardboard dividers, polyethylene wrap | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm |
Recommended spaces / users / usage modes
| Residential small dining areas | Ideal for apartments, studio flats or compact kitchen nooks where 4-person dining is needed without the footprint of a leg-style table | |
|---|---|---|
| Modern office break rooms | Suitable for staff lunch areas or casual meeting spaces in contemporary workplaces | |
| Reception waiting areas | Appropriate for contemporary office or salon reception zones for guest seating | |
| Compact cafe and bistro use | Can be specified for small casual dining establishments with modern decor | |
| Open-plan home living spaces | Works as a secondary dining or game table in open concept living areas | |
| Compact residential dining spaces | Ideal for apartments, studio flats or kitchen nooks requiring 4-person dining capacity without the footprint of a 4-leg table | |
| Contemporary reception areas | Appropriate for modern office, salon or gallery reception zones for guest seating | |
| Small casual food service venues | Can be specified for boutique cafes, bistros or co-working pantries with modern decor |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
