| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 600 x 600 x 750 mm | |
|---|---|---|
| Tabletop thickness with edge trim | 25 mm | |
| Square floor base dimensions | 450 x 450 mm | |
| Central support column diameter | 76 mm | |
| Upper matte black column section height | 490 mm | |
| Lower gold column section height | 130 mm | |
| Minimum knee clearance height under tabletop | 710 mm | |
| Tabletop corner bevel radius | 30 mm | |
| Floor base plate thickness | 8 mm | |
| Gold edge trim width | 15 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Table net weight | 25 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 136 kg | |
| Recommended seating capacity | 3 people | |
| Sintered stone surface abrasion resistance | 6000 cycles | |
| Base anti-slip pad static friction coefficient | 0.6 | |
| Maximum uneven floor tolerance for stable placement | 5 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface layer | 12 mm thick sintered stone, white marble-look polished finish | |
|---|---|---|
| Tabletop edge trim | 0.8 mm thick polished gold-plated stainless steel | |
| Upper support column section | 1.5 mm thick matte black powder-coated steel tube | |
| Lower support column section | 1.2 mm thick polished gold-plated stainless steel sleeve | |
| Floor base plate | 8 mm thick brushed gold stainless steel flat plate | |
| Undertable support bracket | 2 mm thick powder-coated steel cross bracket | |
| Base bottom pads | 5 mm thick non-slip rubber floor protectors | |
| Assembly hardware | M8 zinc-plated steel connecting bolts and washers | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Knock-down assembly structure | Tabletop, column and base ship disassembled for reduced shipping volume | |
|---|---|---|
| Four-direction knee clearance | Open space around central column supports seating from all four sides | |
| Stain-resistant tabletop surface | Non-porous sintered stone surface resists liquid spills and food stains | |
| Heat-resistant tabletop | Sintered stone surface withstands hot tableware up to 180°C without damage | |
| Floor protection design | Rubber pads under base prevent scratching hard flooring during use | |
| Fixed height design | 750 mm standard dining height compatible with standard dining chairs | |
| Easy surface maintenance | Smooth metal and stone surfaces wipe clean with standard commercial cleaning agents | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Commercial cafe seating areas | Compact footprint fits tight spacing for coffee shop and bistro dine-in service | |
|---|---|---|
| Small apartment dining nooks | 600mm square size saves floor space in compact residential dining areas | |
| Boutique hotel lobby lounge areas | Two-tone black and gold finish matches modern light luxury interior design schemes | |
| Milk tea and dessert shop seating | Stain-resistant easy-clean surface supports high-turnover food service use | |
| Co-working office breakout areas | Compact size supports casual meeting and break space for small teams |
EU Market Access Requirements* EN Standards
| EN 12521:2015 Furniture - Strength, durability and safety for domestic dining tables | Sets minimum strength and stability requirements for dining table use | |
|---|---|---|
| EN 1022:2018 Domestic furniture - Seating - Determination of stability | Reference for associated seating stability when used with this table |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 Desk/Table Products Test | Defines commercial-grade table load and durability test methods | |
|---|---|---|
| ANSI/BIFMA X7.1-2020 Furniture Sustainability Standard | Provides framework for low-emission material selection for commercial projects |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to structural safety and dimension tolerance of the table substrate | |
|---|---|---|
| GB/T 4893.4-2013 Furniture surface adhesion test | Applicable for verifying coating adhesion on metal components |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applies to structural safety and dimension tolerance of the table substrate; 2. GB/T 4893.4-2013 Furniture surface adhesion test: Applicable for verifying coating adhesion on metal components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
