| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 800 x 800 x 1100 mm | |
|---|---|---|
| Tabletop thickness | 40 mm | |
| Central support column outer diameter | 80 mm | |
| Round floor base diameter | 550 mm | |
| Floor base thickness | 3 mm | |
| Underside knee clearance height from floor | 1060 mm | |
| Underside leg clearance radius from column center | 320 mm | |
| Column connection collar height at tabletop underside | 50 mm | |
| Floor clearance under base edge | 2 mm | |
| Tabletop overhang past column edge on all sides | 360 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Product net weight | 22 kg | |
|---|---|---|
| Maximum distributed static tabletop load | 50 kg | |
| Maximum point load at tabletop edge | 15 kg | |
| Recommended number of users | 4 | |
| Recommended bar stool seat height | 750 mm | |
| Chrome finish abrasion resistance | 3000 cycles | |
| Tabletop surface impact resistance | 1 J | |
| Floor protection pad load rating per pad | 8 kg | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop core | 18mm high-density particleboard core | |
|---|---|---|
| Tabletop surface finish | High-gloss white melamine laminate | |
| Central support column | 1.5mm thick chrome-plated cold-rolled steel tube | |
| Round floor base | Stamped 3mm thick chrome-plated steel plate | |
| Anti-slip floor protectors | Black rubber pads fitted under base perimeter | |
| Tabletop mounting hardware | Zinc-plated steel bolts securing tabletop to column collar | |
| Tabletop edge treatment | Matching white PVC edge banding | |
| Chrome surface treatment | Polished multi-layer nickel-chrome plating | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Height adjustment function | Fixed non-adjustable 1100mm bar height | |
|---|---|---|
| Floor leveling function | 4 adjustable rubber foot pads on base underside | |
| Surface spill resistance | Sealed non-porous gloss tabletop surface | |
| Stability reinforcement | 4 internal welded steel ribs connecting column to base plate | |
| Mobility feature | Lightweight single-pedestal design allows repositioning by two people | |
| Anti-tip design | Wide 550mm diameter base centered directly under tabletop | |
| Assembly structure | Knock-down three-part assembly (tabletop, column, base) | |
| Surface scratch resistance | Hard melamine top surface resists scratches from glassware and tableware | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 1 | |
|---|---|---|
| Shipping carton dimensions | 850 x 850 x 120 mm | |
| Gross shipping weight | 25 kg | |
| Shipping volume per unit | 0.09 CBM | |
| Required assembly time | 20 minutes | |
| 20ft full container load quantity | 310 units | |
| 40ft HQ full container load quantity | 760 units | |
| Included hardware per unit | 1 set zinc-plated mounting bolts, 1 hex key, 4 replacement rubber foot pads, assembly instruction sheet | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Commercial hospitality use | Cafes, cocktail bars, pubs and restaurant lounge areas | |
|---|---|---|
| Residential home bar use | Home entertainment areas, open plan kitchen bar zones | |
| Breakout space use | Office breakout zones, co-working refreshment areas | |
| Outdoor covered patio use | Semi-outdoor covered patios and smoking areas (non-exposed to rain) | |
| Event and function use | Temporary event setups, wedding receptions and pop-up bars | |
| Seating configuration | Pairs with 2 to 4 backless or low-back bar stools | |
| Surface care suitability | High traffic areas requiring quick cleaning |
EU Market Access Requirements* EN Standards
| Furniture safety stability standard | EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic tables | |
|---|---|---|
| Furniture surface emission standard | EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
Standards applicable to China-market projects
| Table stability standard | GB/T 3324General technical requirements for wooden furniture | |
|---|---|---|
| Furniture hardware performance | GB/T 28204Hardware for furniture, general requirements | |
| Surface finish safety | GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | |
| Metal furniture coating standard | GB/T 13667.1Steel furniture - Part 1: General requirements |
This product must meet the following technical requirements: 1. Table stability standard: GB/T 3324General technical requirements for wooden furniture; 2. Furniture hardware performance: GB/T 28204Hardware for furniture, general requirements; 3. Surface finish safety: GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture; 4. Metal furniture coating standard: GB/T 13667.1Steel furniture - Part 1: General requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
