| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1000 x 1000 x 750 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Leg cross-section at floor | 40 mm square | |
| Undertable knee clearance height | 690 mm | |
| Clear leg span at floor level | 900 mm | |
| Cross brace height from floor | 420 mm | |
| Tabletop overhang past leg connection | 110 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net product weight | 25 kg | |
|---|---|---|
| Tabletop uniform static load capacity | 100 kg | |
| Recommended seating capacity | 4 people | |
| Leg assembly static stability load | 80 kg lateral force | |
| Surface abrasion resistance | 400 revolutions | |
| Wood substrate moisture content | 12% | |
| Vertical impact resistance for tabletop | 120 mm drop | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | Solid ash wood veneer over MDF core | |
|---|---|---|
| Tabletop edge finish | Matte clear UV lacquer | |
| Support legs | Solid natural ash wood | |
| Cross support bracing | Solid ash wood | |
| Joint hardware | Zinc-plated steel confirmat screws | |
| Foot pads | Non-marking PE plastic | |
| Surface coating | Low-VOC water-based wood sealer | |
| Edge banding | 0.6mm thick solid ash veneer edge band | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Structural bracing system | Four-point cross brace connects all legs at mid-height, eliminates wobble during regular dining use | |
|---|---|---|
| Assembly configuration | Knock-down flat pack design, legs and brace attach to tabletop with included hardware, no on-site cutting or drilling required | |
| Floor protection function | Each leg is fitted with a replaceable glide pad to prevent scratching hard flooring and allow minor level adjustment | |
| Seating access | Circular tabletop has no sharp corners, allows flexible chair positioning around the full perimeter with no fixed leg positions blocking seating | |
| Surface usage suitability | Smooth sealed tabletop supports placement of dinnerware, glassware, and small decor items, resists minor water spills with immediate wiping | |
| Heat resistance | Finished tabletop withstands contact with 85°C hot serving dishes for 10 minutes without discoloration or finish damage | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 1 carton | |
|---|---|---|
| Shipping carton dimensions | 1060 x 1060 x 140 mm | |
| Gross shipping weight | 29 kg | |
| Shipping volume per unit | 0.158 CBM | |
| assembly time | 30 minutes | |
| 20ft GP container loading quantity | 170 units | |
| 40ft HQ container loading quantity | 420 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm |
Recommended spaces / users / usage modes
| Residential dining area | Fits small apartments, compact dining nooks or open-plan kitchen spaces for 4-person family meals | |
|---|---|---|
| Casual meeting space | Suitable for small office break rooms, co-working lounges or cafe seating areas for informal discussions | |
| Balcony or sunroom use | Lightweight wood construction works for covered outdoor casual dining or tea service, for indoor or fully sheltered spaces only | |
| Recommended pairing | Matches with solid wood or upholstered dining chairs with 450 mm seat height for ergonomic dining posture | |
| Studio apartment multi-use space | Functions as a compact work or craft table outside of meal times, supporting laptop use and small project work |
EU Market Access Requirements* EN Standards
| EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables | Applicable as acceptance reference for structural strength, stability and safety for residential dining use | |
|---|---|---|
| EN 13722:2004 Furniture - Test methods for the assessment of surface resistance to dry heat | Applicable as acceptance test for tabletop resistance to hot serving dishes | |
| EN 71-3:2019+A1:2021 Safety of toys - Part 3: Migration of certain elements | Applicable as reference for surface coating heavy metal limits for furniture used in homes with young children |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable as acceptance standard for dimensional tolerance, structural stability, and surface finish quality | |
|---|---|---|
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applicable as acceptance standard for formaldehyde and heavy metal emission limits | |
| GB/T 4893.8-2013 Test of surface coatings for furniture - Part 8: Determination of abrasion resistance | Applicable as acceptance test for tabletop surface durability | |
| GB/T 4893.2-2020 Test of surface coatings for furniture - Part 2: Determination of resistance to wet heat | Applicable as acceptance test for tabletop resistance to hot wet serving items |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable as acceptance standard for dimensional tolerance, structural stability, and surface finish quality; 2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applicable as acceptance standard for formaldehyde and heavy metal emission limits; 3. GB/T 4893.8-2013 Test of surface coatings for furniture - Part 8: Determination of abrasion resistance: Applicable as acceptance test for tabletop surface durability; 4. GB/T 4893.2-2020 Test of surface coatings for furniture - Part 2: Determination of resistance to wet heat: Applicable as acceptance test for tabletop resistance to hot wet serving items; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
