| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 800 x 800 x 750 mm | |
|---|---|---|
| Tabletop diameter | 800 mm | |
| Tabletop thickness | 25 mm | |
| Central support column diameter | 80 mm | |
| Base plate diameter | 550 mm | |
| Base plate thickness | 8 mm | |
| Under-table knee clearance height | 700 mm | |
| Under-table clear leg radius from column | 235 mm | |
| Floor clearance under base edge | 5 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Product net weight | 18 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 50 kg | |
| Recommended user capacity | 2 persons | |
| Tipping resistance lateral load | 20 kg | |
| Surface impact resistance | 2 Nm | |
| Tabletop surface abrasion resistance | 3000 cycles | |
| Column-base joint static torque resistance | 80 Nm | |
| Finish coating durability on chrome components | 500 hours | |
| Tabletop moisture content for wood-based core | 10% | |
| Top Static Load Reference | 150 kg uniformly distributed |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop core | 18mm MDF substrate | |
|---|---|---|
| Tabletop surface finish | 0.6mm high-pressure oak woodgrain laminate | |
| Tabletop edge profile | 2mm PVC edge banding, rounded eased edge | |
| Central support column | 1.2mm thick chrome-plated steel tube | |
| Base plate | 8mm thick cold-rolled steel, polished chrome plated | |
| Column-base mounting hub | Die-cast zinc alloy, chrome plated | |
| Tabletop mounting plate | 3mm thick powder-coated steel, pre-drilled for fixing screws | |
| Floor protection pads | 4x 5mm thick EVA rubber pads, affixed to base underside | |
| Leveling feet | M8 nickel-plated steel threaded studs with nylon base | |
| Assembly hardware | Zinc-plated steel hex bolts, M6 size, with matching washers | |
| Chrome plating layer thickness on steel components | 8 μm | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up |
Adjustment / rotation / tilt / mobility / storage features
| Freestanding installation | No permanent floor fixing required, weighted round base provides stable support on all flat hard floor surfaces | |
|---|---|---|
| 360-degree unobstructed leg access | Central column placement eliminates corner legs, allows seating at any position around the round tabletop | |
| Easy-clean work surface | Seamless laminate surface and rounded edge allow wipe-down cleaning without crevices for food or liquid trapping | |
| Leveling adjustment | M8 adjustable feet under base plate allow 10mm height adjustment to compensate for uneven floors | |
| Disassembly for transport | Tabletop detaches from column via bolted fixing, base separates from column via threaded joint for flat-pack shipping | |
| Surface corrosion resistance | Triple-layer chrome plating on steel components provides protection against rust and discoloration in indoor cafe and breakroom environments | |
| Stain resistance for dining use | High-pressure laminate surface resists common food and beverage stains including coffee, juice and oil without permanent discoloration | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 1 | |
|---|---|---|
| Shipping carton dimensions | 870 x 620 x 120 mm | |
| Gross shipping weight | 21 kg | |
| Shipping volume per unit | 0.065 CBM | |
| Assembly time per unit | 20 minutes | |
| 20ft full container load quantity | 420 units | |
| 40ft HQ container load quantity | 1020 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm |
Recommended spaces / users / usage modes
| Small domestic dining areas | Suits studio apartments, kitchen nooks and compact dining spaces, accommodates two diners without occupying excessive floor space | |
|---|---|---|
| Office breakrooms and pantries | Provides space for employee coffee breaks, casual meals and small informal meetings, easy-clean surface supports frequent daily use | |
| Cafes and casual bistro seating | Suitable for front-of-house 2-seat dining positions, chrome finish complements modern and industrial interior design schemes | |
| Hotel guest room work and dining surfaces | Functions as a combined small desk and dining table for hotel rooms, pedestal design allows flexible chair placement without leg obstruction | |
| Reception and waiting areas | Suitable for placing reading materials, beverages and decorative items in office or hospitality waiting spaces, compact footprint fits low-traffic seating zones |
EU Market Access Requirements* EN Standards
| Domestic furniture safety requirements | EN 12521:2015 | |
|---|---|---|
| Contract furniture performance requirements | EN 15372:2016 | |
| Surface resistance to cold liquids | EN 12720:2013 |
Standards applicable to China-market projects
| Dining table dimensional stability | GB/T 3324 | |
|---|---|---|
| Furniture mechanical stability | GB/T 10357.1 | |
| Laminate surface performance | GB/T 17657 | |
| Furniture harmful emission limits | GB 18584 |
This product must meet the following technical requirements: 1. Dining table dimensional stability: GB/T 3324; 2. Furniture mechanical stability: GB/T 10357.1; 3. Laminate surface performance: GB/T 17657; 4. Furniture harmful emission limits: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
