| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 3600 x 600 x 1100 mm | |
|---|---|---|
| internal work surface height | 750 mm | |
| front modesty panel height above floor | 1050 mm | |
| lower storage compartment height | 400 mm | |
| knee clearance height under work surface | 650 mm | |
| work surface depth behind front panel | 500 mm | |
| black horizontal accent trim thickness | 20 mm | |
| black plinth base height | 30 mm | |
| top panel thickness | 25 mm | |
| vertical side panel thickness | 18 mm | |
| edge banding thickness | 2 mm | |
| per-station work surface width | 900 mm | |
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| total tabletop static load capacity | 260 kg | |
|---|---|---|
| drawer slide cycle rating | 50000 cycles | |
| cabinet door hinge cycle rating | 80000 cycles | |
| paint surface scratch hardness | 2H | |
| paint adhesion rating | 5B | |
| color difference control for batch production | 1.5 ΔE | |
| leveling foot adjustment range | 15 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| panel substrate | E0-grade high-density fiberboard | |
|---|---|---|
| front facade finish | High-gloss white polyurethane baked paint | |
| accent trim | 2mm thick black ABS edge banding | |
| internal support frame | 1.2mm thick cold-rolled steel tubing | |
| drawer slides | Cold-rolled steel ball-bearing full-extension slides | |
| door hinges | Zinc-alloy soft-close concealed hinges | |
| leveling feet | Nylon base with steel threaded stem | |
| cable management grommets | ABS plastic with brush seal | |
| internal back panel | 9mm thick medium-density fiberboard | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| enclosed lower storage compartments | 4 equal divided cabinet spaces behind front lower panels | |
|---|---|---|
| concealed cable management routing | Internal channels under work surface connect to desk grommets | |
| adjustable leveling feet | Threaded stem feet at all base corners | |
| visitor-facing modesty barrier | Continuous solid front panel blocks view of staff lap and legs | |
| modular assembly connection | Cam-lock fasteners join pre-finished panel sections | |
| custom branding provision | Smooth front panel supports applied company logo decals | |
| removable cabinet access panels | Front lower panels open to access interior storage | |
| work surface grommet openings | 80mm diameter cable ports at each station | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
Recommended spaces / users / usage modes
| corporate office lobby entry | Placed against branded entry wall for visitor greeting and check-in | |
|---|---|---|
| 4-staff reception team deployment | Divided work surface accommodates four simultaneous reception positions | |
| modern minimalist commercial interiors | Glossy white finish with black trim suits contemporary office design schemes | |
| Service counter for commercial spaces | Usable as welcome desk for medical clinics, hotels or co-working centers | |
| Visitor check-in workflow | Work surface height supports seated check-in, document processing and visitor interaction | |
| Lobby reception with concealed storage | Lower cabinets store forms, supplies and office equipment out of visitor view |
EU Market Access Requirements* EN Standards
| EN 527-2:2002+A1:2016 | Office worktables safety and strength requirements | |
|---|---|---|
| EN 15372:2016 | Furniture durability and strength for office storage | |
| EN 717-1:2004 | Formaldehyde emission determination for wood panels |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk products performance standard | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Storage units performance standard |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden office furniture | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels | |
| GB/T 4893.4-2013 | Surface wear resistance test for furniture coatings | |
| GB/T 4893.9-2013 | Surface impact resistance test for furniture coatings |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden office furniture; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels; 3. GB/T 4893.4-2013: Surface wear resistance test for furniture coatings; 4. GB/T 4893.9-2013: Surface impact resistance test for furniture coatings; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
