| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall external dimensions | 1830 x 900 x 610 mm | |
|---|---|---|
| Internal soaking basin length | 1730 mm | |
| Internal soaking basin width | 830 mm | |
| Basin soaking water depth | 460 mm | |
| Rim width (flat mounting edge) | 100 mm | |
| Center drain outlet diameter | 50 mm | |
| Floor clearance under tub base | 20 mm | |
| Faucet fixture height above rim | 180 mm | |
| Base contact footprint length | 1200 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net product weight | 168 kg | |
|---|---|---|
| Maximum fill water capacity | 360 L | |
| Recommended maximum user weight | 150 kg | |
| Surface wear resistance rating | 4000 abrasion cycles | |
| Thermal heat retention duration | 60 minutes | |
| Product structural warranty period | 25 years | |
| Available finish color count | 3 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tub body construction | 80% natural mineral powder + 20% PMMA resin solid surface | |
|---|---|---|
| Surface finish coating | High-gloss UV-cured gel coat, 0.8mm thickness | |
| Rim-mounted faucet body | Brass core with matte white powder coating | |
| Drain waste assembly | Chrome-plated brass click-clack pop-up drain | |
| Internal reinforcement layer | Fiberglass-reinforced resin backing, 8mm thickness | |
| Base contact padding | Non-slip EPDM rubber foot pads, 5mm thickness | |
| Water supply connection lines | 304 stainless steel braided flexible hoses | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Installation method | Freestanding above-floor installation, no wall anchoring required | |
|---|---|---|
| Drain operation | Click-clack pop-up drain activated by foot press | |
| Faucet function | Single-lever rim-mounted mixer for hot/cold water flow control | |
| Overflow protection | Concealed internal overflow to prevent overfill | |
| Surface maintenance | Non-porous seamless surface allows stain removal and scratch repair | |
| Load bearing design | Reinforced curved base supports static fill load plus two adult users | |
| Plumbing compatibility | Compatible with standard above-floor rough-in drain connections | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Luxury residential master bathroom | Freestanding design serves as focal point for high-end residential bath spaces | |
|---|---|---|
| Upscale hotel guest suite bathroom | Durable solid surface material withstands high-frequency commercial guest use | |
| Boutique resort villa soaking space | Deep soaking basin supports immersive relaxation for resort guest experiences | |
| High-end residential show home installation | Sculptural silhouette enhances premium interior design presentation for property marketing | |
| Freestanding open-plan bathroom layout | Symmetrical tapered form works for central room placement without wall adjacency |
EU Market Access Requirements* EN Standards
| EN 14516:2018 | Baths for domestic use – Functional requirements and test methods | |
|---|---|---|
| EN 274:2002 | Waste fittings for sanitary appliances – Test methods and requirements | |
| EN 198:2008 | Sanitary tapware – General technical specification for single valves |
Standards applicable to China-market projects
| GB 6952-2015 | Sanitary ware performance and safety requirements for bathtubs | |
|---|---|---|
| GB/T 38150-2019 | Specification for solid-surface sanitary ware products | |
| GB 25501-2010 | Water efficiency rating and test methods for sanitary fixtures |
This product must meet the following technical requirements: 1. GB 6952-2015: Sanitary ware performance and safety requirements for bathtubs; 2. GB/T 38150-2019: Specification for solid-surface sanitary ware products; 3. GB 25501-2010: Water efficiency rating and test methods for sanitary fixtures; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
