| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 622 x 629 x 1092 mm | |
|---|---|---|
| Seat width | 520 mm | |
| Seat depth | 520 mm | |
| Seat height above floor | 508 mm | |
| Back height above seat | 660 mm | |
| Back width at shoulder area | 500 mm | |
| Seat cushion thickness | 120 mm | |
| Back padding thickness | 57 mm | |
| Arm height above seat | 216 mm | |
| Arm height above floor | 686 mm | |
| Arm pad top width | 70 mm | |
| Front floor footprint width | 560 mm | |
| Rear floor footprint depth | 590 mm | |
| Under-seat knee clearance height | 250 mm | |
| Floor glide size | 30 x 20 mm | |
| Finished Seat Cushion Thickness | 90 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 181 kg | |
|---|---|---|
| Net weight | 22.7 kg | |
| Seating capacity | 1 person | |
| Foam density | 30 kg/m3 | |
| Foam rebound | 40% | |
| Seat static load acceptance target | 181 kg | |
| Backrest horizontal static load target | 91 kg | |
| Sled-frame cyclic seating durability target | 120,000 cycles | |
| Upholstery abrasion acceptance target | 50,000 Martindale cycles | |
| Floor glide sliding durability target | 50,000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Cognac brown leather-look upholstery with smooth grain and tailored edge stitching | |
|---|---|---|
| Seat cushion | Molded polyurethane foam pad, 120 mm thick, medium-firm support | |
| Back cushion | Shaped polyurethane foam padding, 57 mm thick, with lumbar contour | |
| Internal seat board | 12 mm molded plywood or composite seat support | |
| Internal back board | 8 mm curved plywood or molded composite backer | |
| Load-bearing frame | 25 mm round polished chrome steel cantilever frame | |
| Steel tube wall thickness | 1.5 mm | |
| Chrome plating | 0.25 mm nickel-chrome finish over steel tube | |
| Armrest construction | Upholstery-wrapped padded arm shells over rigid inner support | |
| Underside impact panel | Black textured protective panel between seat and chrome frame | |
| Floor glides | Four replaceable nylon or acetal glides with light-colored bases | |
| Stitching details | Bonded polyester seam thread with 7 stitches per 50 mm |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Base movement | Fixed non-swivel cantilever sled base without casters | |
|---|---|---|
| Height adjustment | None; seat remains fixed at 508 mm above floor | |
| Back recline | Fixed back angle with no tilt mechanism | |
| Back angle | 100 degrees from horizontal seat plane | |
| Arm support | Fixed wrap-around padded arms at 216 mm above the seat | |
| Seating flex | Chrome cantilever runners provide controlled vertical flex | |
| Floor protection | Four replaceable glides distribute load and reduce floor marking | |
| Stacking capability | Non-stacking construction due to high upholstered arms and back | |
| Lumbar support | Integrated shaped lower-back padding with no adjustable lumbar | |
| Cleaning access | Smooth upholstered surfaces and exposed chrome frame allow wipe-down maintenance | |
| Movement method | Lightweight repositioning by lifting or sliding on glides | |
| Installation | Knock-down attachment of seat-back assembly to chrome sled base with threaded fasteners |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office visitor seating | Place one or two chairs across from a 760 mm high executive desk for short meetings, where fixed 508 mm seat height supports face-to-face discussion. | |
|---|---|---|
| Conference room seating | Use around boardroom tables with glides rather than casters to provide stable executive seating during presentations and committee meetings. | |
| Reception and waiting areas | Install in corporate lobbies or premium reception zones for visitors seeking padded high-back support during 60 minute waits. | |
| Management meeting rooms | Specify cognac upholstery with chrome framing where warm executive styling must coordinate with wood, leather, or neutral office interiors. | |
| Hotel business lounges | Use in quiet business centers or club floors for laptop-free discussion, phone calls, and temporary guest seating. | |
| Professional service suites | Deploy in legal, financial, or consulting client rooms where a fixed non-swivel guest chair conveys formality and stable seating. | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 16139:2013+A1:2023 | Applicable European strength, durability and safety standard for non-domestic seating. | |
|---|---|---|
| EN 1022:2018 | Suggested stability test method for the fixed cantilever chair. | |
| EN 12520:2015 | Domestic furniture seating safety reference if residential use is also specified. | |
| EN 71-3:2019+A1:2021 | Migration safety reference only when child-care or educational environments require it. |
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 (R2022) | Commercial office chairs standard; specify back, seat, leg and static-load tests for acceptance. | |
|---|---|---|
| ANSI/BIFMA e3-2024 | Use for furniture sustainability claims only after the exact model receives certification. | |
| BIFMA X5.1 durability tests | Require 120,000-cycle seating and 65,000-cycle back-test evidence from an accredited laboratory. |
Standards applicable to China-market projects
| GB/T 10357.2-2013 | Suggested chair mechanical test standard covering backrest strength for contract procurement. | |
|---|---|---|
| GB/T 10357.3-2013 | Suggested chair leg and forward-static-load evaluation for the sled frame. | |
| GB 18584-2001 | Indoor decorative-material pollutant limit reference for wood-based furniture components. | |
| GB/T 2960-2020 | Use only if genuine leather is supplied; PU, bonded leather or vinyl must use correct material labeling. |
This product must meet the following technical requirements: 1. GB/T 10357.2-2013: Suggested chair mechanical test standard covering backrest strength for contract procurement.; 2. GB/T 10357.3-2013: Suggested chair leg and forward-static-load evaluation for the sled frame.; 3. GB 18584-2001: Indoor decorative-material pollutant limit reference for wood-based furniture components.; 4. GB/T 2960-2020: Use only if genuine leather is supplied; PU, bonded leather or vinyl must use correct material labeling.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
