| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1600 x 350 x 800 mm | |
|---|---|---|
| Back gallery rail height | 90 mm | |
| Single slatted door size | 400 x 450 mm | |
| Central open compartment size | 600 x 450 mm | |
| Central shelf clearance per tier | 220 mm | |
| Lower open slatted shelf height from floor | 200 mm | |
| Support leg section size | 40 x 40 mm | |
| Lower slatted shelf depth | 300 mm | |
| Brass teardrop pull length | 80 mm | |
| Vertical slat width on doors | 18 mm | |
| Slat gap width on doors | 18 mm | |
| Lower shelf solid end platform size | 150 x 300 mm | |
| Carcass panel thickness | 20 mm | |
| Back panel thickness for open shelves | 9 mm | |
| Edge band thickness | 2 mm | |
| Back Panel Thickness | 9 mm |
Net weight / load capacity / users / durability
| Total unit static load capacity | 100 kg | |
|---|---|---|
| Door hinge cycle rating | 50000 cycles | |
| Unit net weight | 90 kg | |
| Recommended maximum weight for top surface | 60 kg | |
| Anti-tip connector required quantity | 2 | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main structural frame | Solid kiln-dried hardwood, walnut brown matte lacquer finish | |
|---|---|---|
| Cabinet door slats | Solid wood vertical slats, same walnut finish as frame | |
| Open compartment back panel | 9mm dark brown MDF backing, matte finish | |
| Hardware pulls | Cast brass teardrop-shaped handles, brushed brass finish | |
| Door hinges | Cold-rolled steel concealed soft-close hinges, zinc-plated | |
| Lower slatted shelf | Solid wood slats with shaped stepped end caps, walnut finish | |
| Back gallery rail | Solid wood frame with central vertical slats, shaped cutout corners | |
| Support legs | Solid wood squared straight legs, floor-protecting felt pads | |
| Shelf surfaces | Solid wood flat panels, sanded smooth with matching lacquer finish | |
| Finish coating | Low-VOC matte nitrocellulose lacquer, scratch-resistant top coat | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
Adjustment / rotation / tilt / mobility / storage features
| Side cabinet storage | Two slatted doors conceal single-compartment enclosed storage on left and right | |
|---|---|---|
| Central open display | Two-tier fixed open shelf for frequently accessed entry items or decor | |
| Lower open storage | Full-width slatted open shelf designed for shoe storage and daily entry items | |
| Gallery rail guard | Raised back top rail prevents items from sliding off rear of top surface | |
| Door operation | Hinged doors open 110 degrees outward for full access to enclosed storage | |
| Ventilation design | Slatted door and shelf construction allows air circulation for stored footwear | |
| Floor protection | Felt pads on leg bottoms prevent scratches to hard flooring surfaces | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Residential entryway | Suitable for placement against entry walls for shoe, key and decor storage | |
|---|---|---|
| Living room partition | Functions as a low open partition between living room and entry space | |
| Dining room sideboard | Usable as a dining storage cabinet for tableware and serving items | |
| Reception waiting area | Suitable for commercial reception spaces for visitor item storage | |
| Tea room storage | Ideal for traditional tea rooms to store tea ware and display decor | |
| Hallway accent piece | Works as a decorative narrow hallway cabinet for small display items | |
| Matching configuration | Pairs with solid wood entry benches, shoe racks and hanging racks in the same finish |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops - safety requirements | |
|---|---|---|
| EN 71-3:2019 | Safety of toys - migration of certain elements, applicable to hardware finish safety | |
| EN 13722:2004 | Furniture - test methods for strength and durability of storage units |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural and finish quality | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture | |
| GB/T 4893.8-2013 | Test for surface wear resistance of furniture coatings |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural and finish quality; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture; 3. GB/T 4893.8-2013: Test for surface wear resistance of furniture coatings; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
