| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 800 x 400 x 850 mm | |
|---|---|---|
| Countertop thickness | 30 mm | |
| Left open shelf internal dimensions | 350 x 360 x 280 mm | |
| Upper drawer internal dimensions | 350 x 360 x 120 mm | |
| Lower drawer internal dimensions | 350 x 360 x 150 mm | |
| Right door cabinet internal dimensions | 400 x 370 x 560 mm | |
| Carcass panel thickness | 18 mm | |
| Back panel thickness | 9 mm | |
| Door panel thickness | 20 mm | |
| Adjustable shelf thickness in door cabinet | 15 mm | |
| Edge banding thickness | 5 mm | |
| Open shelf clearance height | 280 mm | |
| Leg base height | 20 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Product net weight | 45 kg | |
|---|---|---|
| Countertop static load capacity | 50 kg | |
| Formaldehyde emission grade | E1 | |
| Paint film hardness | 3H | |
| Drawer slide cycle rating | 50000 cycles | |
| Door hinge cycle rating | 80000 cycles | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
| Substrate carcass | High-density fiberboard (HDF) | |
|---|---|---|
| Exterior finish | 0.6mm natural walnut wood veneer | |
| Edge treatment | 5mm solid wood edge banding | |
| Coating | Polyurethane environmental paint | |
| Hardware pulls | Brass-toned zinc alloy | |
| Drawer slides | Stainless steel silent ball-bearing slides | |
| Door hinge | Stainless steel hydraulic damping hinge | |
| Back panel | 9mm HDF with veneer matching | |
| Internal shelf | 15mm HDF with walnut veneer | |
| Foot pads | Non-slip plastic adjustable feet | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
Adjustment / rotation / tilt / mobility / storage features
| Storage layout | Left upper open shelf, 2 lower left drawers, right single door cabinet | |
|---|---|---|
| Door operation | Hinged single door opens 110 degrees, with magnetic catch | |
| Drawer operation | Full extension 3-section slides, soft-close, load rated 15kg per drawer | |
| Countertop use | Waterproof heat-resistant surface for electric tea boilers and tea sets | |
| Door cabinet storage | Removable adjustable shelf to accommodate bottled water dispensers | |
| Open shelf function | Open access for frequently used tea canisters and tea sets | |
| Anti-tip feature | 2 wall-mounted anti-tip connectors included | |
| Surface maintenance | Stain-resistant wipe-clean finish, resistant to tea and water stains | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Office tea break area | Placed against wall for tea preparation, tool and supply storage | |
|---|---|---|
| Executive office side placement | Positioned next to executive desk for private tea service storage | |
| Reception area side service | Used to serve visiting guests with tea set and boiler storage | |
| Home living room side storage | Used as small sideboard for tea and beverage accessory storage | |
| Recommended matching setup | Pair with matching walnut office desk and leather guest chair | |
| User group | Office administrators, reception staff, tea enthusiasts |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural and dimensional acceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | |
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, requires E1 grade for office use | |
| GB 18581-2020 | Limit of harmful substances of solvent based wood coatings for furniture finishes |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural and dimensional acceptance; 2. GB 18584-2001: Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture; 3. GB 18580-2017: Formaldehyde emission limits for wood-based panels, requires E1 grade for office use; 4. GB 18581-2020: Limit of harmful substances of solvent based wood coatings for furniture finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
