| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total bed weight (mattress excluded) | 85 kg | |
|---|---|---|
| Total static load capacity | 500 kg | |
| Lift mechanism open angle | 45 degrees | |
| Gas strut lift cycle rating | 10000 cycles | |
| Recommended mattress thickness | 280 mm | |
| Slat center support static load | 300 kg | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Light grey matte linen-look fabric | |
|---|---|---|
| Headboard padding | 30kg/m³ high-density polyurethane foam | |
| Internal frame | 18mm thick E0 grade engineered plywood | |
| Support legs | 1.2mm thick carbon steel with gold powder coating | |
| Lift mechanism hardware | 1.5mm thick cold-rolled steel | |
| Mattress support slats | 12mm thick bent plywood slats | |
| Footboard panel | Light grey upholstery matching headboard | |
| Lift pull handle | Black powder-coated solid steel bar | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Gas-assisted lift storage | Footboard-operated hydraulic lift raises entire mattress platform | |
|---|---|---|
| Quiet slat support system | Flexible plywood slats with rubber dampening pads | |
| Floor protection glides | Adjustable plastic glides on all leg bases | |
| Channel-tufted ergonomic headboard | Curved top edge with vertically segmented padding | |
| Freestanding installation | Wall-aligned placement without required wall anchoring | |
| Matching nightstand compatibility | Paired design with matching 2-drawer nightstands | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential master bedroom | Suitable for 18sqm bedrooms as primary sleeping furniture | |
|---|---|---|
| Guest bedroom furnishing | Fits small guest rooms with integrated storage for linens and bedding | |
| Apartment and rental furnishing | Freestanding design with easy assembly and disassembly for moving | |
| Coordinated bedroom setups | Pairs with matching 2-drawer upholstered nightstands | |
| Low-maintenance household use | Stain-resistant woven fabric upholstery for easy spot cleaning |
EU Market Access Requirements* EN Standards
| Domestic bed safety requirements | EN 747:2012+A1:2015 | |
|---|---|---|
| Upholstered furniture flammability | EN 1021:2014 | |
| Furniture hardware durability | EN 15372:2016 |
Standards applicable to China-market projects
| Mattress fit dimensional tolerance | GB/T 3328 | |
|---|---|---|
| Upholstered furniture formaldehyde emission | GB 18584 | |
| Furniture mechanical stability | GB/T 10357.6 |
This product must meet the following technical requirements: 1. Mattress fit dimensional tolerance: GB/T 3328; 2. Upholstered furniture formaldehyde emission: GB 18584; 3. Furniture mechanical stability: GB/T 10357.6; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
