| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (Queen size) | 1650 x 2160 x 1195 mm | |
|---|---|---|
| Headboard height above mattress surface | 546 mm | |
| Floor to bed frame upper edge (mattress support surface) | 152 mm | |
| Under-bed clearance (floor to frame bottom) | 152 mm | |
| Compatible mattress thickness | 305 mm | |
| Headboard wing projection depth | 152 mm | |
| Bed side rail height above floor | 305 mm | |
| Headboard thickness (padded) | 102 mm | |
| Side rail upholstered thickness | 76 mm | |
| Mattress support surface width | 1524 mm | |
| Mattress support surface length | 2032 mm | |
| Slat spacing (center to center) | 76 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total static weight capacity (sleepers + mattress) | 500 kg | |
|---|---|---|
| Product net weight | 69 kg | |
| Center support leg static load rating | 136 kg per leg | |
| Upholstery fabric abrasion resistance (Wyzenbeek) | 30000 double rubs | |
| Headboard foam compression recovery rate | 92% | |
| Assembly required hardware count | 28 pieces | |
| Squeak-free service life (residential use) | 10 years | |
| Recommended user count | 2 adults | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| External upholstery (headboard, side rails, base) | Dark blue linen-blend woven fabric | |
|---|---|---|
| Headboard padding | 38mm thick high-density polyurethane foam | |
| Internal structural frame | Kiln-dried solid pine lumber | |
| Mattress support slats | 18mm thick solid poplar slats | |
| Support legs (side and center) | 50mm diameter solid hardwood legs | |
| Cross support beams | 30x90mm reinforced engineered wood beams | |
| Frame joining hardware | Zinc-plated steel bolts and barrel nuts | |
| Floor protection pads | 6mm thick EVA non-slip pads | |
| Seam stitching | Polyester core-spun thread, 8 stitches per inch | |
| Internal frame corner blocking | 12mm thick plywood corner braces | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner |
Adjustment / rotation / tilt / mobility / storage features
| Mattress support design | Slatted platform support, no box spring required for use | |
|---|---|---|
| Noise reduction construction | EVA foam tape applied between slats and beams to eliminate metal/wood friction squeaks | |
| Floor level adjustment | Adjustable foot pads on each support leg to compensate for uneven floor surfaces | |
| Leaning support function | Wingback padded headboard provides upright back support for reading or sitting in bed | |
| Mattress retention design | Recessed platform edge prevents mattress sliding during use | |
| Cleaning maintenance | Spot-clean only with mild upholstery detergent, no machine washing | |
| Assembly design | Flat-pack knockdown construction with included hex key and step-by-step instructions | |
| Mattress alignment | Integrated headboard stop ensures mattress sits flush against headboard without gaps | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary residential application | Master or guest bedroom in modern, Scandinavian, or contemporary home interiors | |
|---|---|---|
| User suitability | Adult couples or single sleepers requiring Queen size sleeping surface | |
| Recommended placement clearance | Minimum 600mm clearance on 3 sides for easy bed making and cleaning | |
| Commercial hospitality use | Mid-range hotel or short-term rental bedrooms with heavy residential-level use | |
| Style compatibility | Pairs with linen bedding, neutral-toned nightstands, and low-pile area rugs | |
| Installation requirement | Two-person assembly required due to frame component weight | |
| Mattress recommendation | Pairs with 300 mm memory foam, hybrid, or innerspring mattresses |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses - Safety requirements and test methods | |
|---|---|---|
| EN 1022:2005 | Domestic furniture - Seating - Determination of stability, applicable to headboard stability testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal wood frame structural safety | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applies to formaldehyde emission control for wood components | |
| GB/T 1952.2-2011 | Technical specifications for upholstered furniture mattresses, applicable to support surface design compatibility |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal wood frame structural safety; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applies to formaldehyde emission control for wood components; 3. GB/T 1952.2-2011: Technical specifications for upholstered furniture mattresses, applicable to support surface design compatibility; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
