| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall footprint | 1680 x 2230 x 1160 mm | |
|---|---|---|
| Headboard height | 1160 mm | |
| Footboard height | 380 mm | |
| Sleeping surface dimensions | 1600 x 2030 mm | |
| Mattress inset depth | 84 mm | |
| Under-bed clearance | 160 mm | |
| Recommended mattress thickness | 380 mm | |
| Side rail thickness | 220 mm | |
| Headboard wing protrusion | 100 mm | |
| Leg height | 160 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total static weight capacity | 500 kg | |
|---|---|---|
| Slat static load rating | 25 kg per slat | |
| Net weight (frame only) | 68 kg | |
| Recommended user count | 2 adults | |
| Slat spacing | 70 mm | |
| Fabric abrasion resistance | 30000 rubs | |
| Foam density (padding) | 35 kg/m³ | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Cream polyester velvet fabric | |
|---|---|---|
| Internal frame core | 18mm thick engineered plywood and MDF | |
| Support slats | 12mm thick bent plywood slats | |
| Padding material | 35kg/m³ high-density polyurethane foam | |
| Support legs | 1.2mm thick tapered steel with gold electroplated finish | |
| Center support beam | 25mm thick engineered wood beam | |
| Noise damping strips | 3mm thick EVA foam strips | |
| Hardware fasteners | Zinc-plated steel bolts and barrel nuts | |
| Floor protection pads | 5mm thick non-slip felt pads | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Support system | Wooden slat platform design | |
|---|---|---|
| Mattress retention | Recessed platform lip | |
| Noise reduction | EVA anti-friction strips between slats and rails | |
| Cleaning access | 160mm under-bed clearance | |
| Knock-down assembly | Bolted connection design | |
| Weight distribution | Single center support beam with center leg | |
| Surface care | Stain-resistant velvet finish | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary application | Residential master bedrooms | |
|---|---|---|
| Secondary application | Boutique hotel guest rooms | |
| Target user group | Adult consumers seeking stylish upholstered beds | |
| Recommended configuration | Pair with 2-drawer gold-leg nightstand, upholstered bench and light wood flooring | |
| Installation requirement | Wall placement for headboard | |
| Cleaning suitability | Low-pile or area rug placement | |
| Color matching | Works with neutral beige, taupe, warm white and light gray decor palettes |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses - Safety requirements and test methods | |
|---|---|---|
| EN 1022:2018 | Domestic furniture - Seating and beds - Determination of stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to frame structural stability testing | |
|---|---|---|
| GB 18584-2001 | Formaldehyde emission limit for wooden furniture, applicable to engineered wood components | |
| GB/T 1952.2-2011 | Spring and upholstered furniture durability requirements for bed frames |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to frame structural stability testing; 2. GB 18584-2001: Formaldehyde emission limit for wooden furniture, applicable to engineered wood components; 3. GB/T 1952.2-2011: Spring and upholstered furniture durability requirements for bed frames; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
