| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Bed frame net weight | 85 kg | |
|---|---|---|
| Total static load capacity | 500 kg | |
| Mattress platform distributed load | 300 kg | |
| Recommended occupant capacity | 2 adults | |
| Recommended mattress thickness | 250 mm | |
| Maximum mattress thickness | 300 mm | |
| Slat spacing reference | 65 mm | |
| Warranty reference | 5 years | |
| Color options target | 4 finishes | |
| Bed Static Load Reference | 400 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Headboard upholstery | Beige soft-surface fabric or leather-look cover over padded panels | |
|---|---|---|
| Headboard padding | High-resilience polyurethane foam with soft upper layer | |
| Side and foot rails | Beige upholstered engineered-wood frame with segmented vertical stitching | |
| Internal bed frame | Engineered wood or solid-wood perimeter frame with center beam | |
| Support slats | 18 poplar or birch bentwood slats, 25 mm nominal width | |
| Center support rail | Rectangular steel or hardwood center beam with one intermediate leg | |
| Exterior legs | Black matte powder-coated steel legs, 25 mm nominal section | |
| Seam construction | Vertical stitched channels with 8 headboard panels and 8 side-rail panels | |
| Back and dust cover | Black non-woven fabric underside and hardboard or plywood headboard back | |
| Edge treatment | Rounded upholstered corners without exposed hard edges | |
| Fasteners and hardware | Steel corner brackets, bed bolts and barrel nuts with black finish | |
| Floor contact pads | Injected plastic or nylon protective glides on each leg |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Sleeping configuration | Two-adult king-size platform bed accepting an 1800 x 2000 mm mattress | |
|---|---|---|
| Headboard support | Tall padded headboard provides upright back support for reading and pillow retention | |
| Platform support | Slatted platform ventilates the mattress and eliminates the need for a box spring | |
| Center load distribution | Center beam with support leg divides the slat span and stabilizes two-sided occupancy | |
| Bed entry | 520 mm sleeping surface height allows adult side entry and seated dressing | |
| Under-bed access | 80 mm open clearance allows robot vacuum passage but does not provide storage drawers | |
| Knock-down assembly | Headboard, side rails, foot rail, slats and legs assemble with bolted corner connectors | |
| Fixing method | Freestanding floor-mounted bed placed against a wall without required wall anchoring | |
| Noise control target | Threaded inserts, lock washers and slat silencers limit movement noise during use | |
| Bedding retention | Inward rail lip and recessed platform hold the mattress within the upholstered frame | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Main bedroom | Suitable for a residential master bedroom using an 1800 x 2000 mm mattress and two-side entry layout. | |
|---|---|---|
| Hotel guest room | Neutral beige upholstery and tall padded headboard fit upscale hotel rooms requiring quiet visual styling. | |
| Apartment furnishing | Low platform form and compact under-bed clearance suit serviced apartments with limited room depth. | |
| Showroom display | Channel stitching and layered bedding presentation support furniture retail showroom vignettes. | |
| Senior living suite | 520 mm sleeping surface target assists seated transfer, subject to final mattress and frame verification. | |
| Bedroom pairing | Pair with light wood case goods, stone-look flooring or warm neutral wardrobes for a coordinated interior. |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture safety, strength and durability requirements for beds; suitable as structural acceptance reference. | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignitability by smouldering cigarette; relevant if flame-retardant specification is required. | |
| EN 717-1:2004 | Formaldehyde release from wood-based panels; use for board emission verification. |
US and Canada office-furniture standards
| ANSI/BIFMA E05-2019 | BIFMA level e3 sustainability standard is not category-specific but may support workplace furniture environmental evaluation. |
|---|
Standards applicable to China-market projects
| GB/T 3324-2024 | General technical requirements for wooden furniture; use for frame dimensions, workmanship and stability inspection. | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture technical requirements; apply if steel legs or center beam are supplied. | |
| GB 18584-2001 | Indoor decorative material limit of formaldehyde for wood-based furniture; require emission test report. | |
| GB/T 10357.6-2013 | Furniture mechanical surface test for bed strength and static loading; use for acceptance inspection. | |
| GB/T 28202-2020 | Furniture hardware terms and quality basis; use when verifying connectors, glides and support fittings. |
This product must meet the following technical requirements: 1. GB/T 3324-2024: General technical requirements for wooden furniture; use for frame dimensions, workmanship and stability inspection.; 2. GB/T 3325-2017: Metal furniture technical requirements; apply if steel legs or center beam are supplied.; 3. GB 18584-2001: Indoor decorative material limit of formaldehyde for wood-based furniture; require emission test report.; 4. GB/T 10357.6-2013: Furniture mechanical surface test for bed strength and static loading; use for acceptance inspection.; 5. GB/T 28202-2020: Furniture hardware terms and quality basis; use when verifying connectors, glides and support fittings.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
